Estudio incluido
Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study
1Ficha bibliográfica
- Autores
- Sajin M C, Sajith Babu, Akhil Devaraj, Sony Kurian, Joby George
- Año
- 2025
- Publicación
- —
- País
- India
- Segmento
- Refrescos, agua embotellada y jugos
- Familia de procesos
- Línea de llenado y envasado
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · 1 máquinas
- Periodo de observación
- 180 días
- Recolección de datos
- maintenance_records
- Intervención
Ver el contexto tal como lo describe el estudio
This study is conducted on the glass bottle filler machine which is a critical machine in a leading beverages manufacturing company.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 13Riesgo bajo
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
Discharge backup sensor malfunctiondischarge sensorVer cita textual (Table 1)Discharge backup sensor malfunction 0 4 0 0 0 0 4 0.27 | Fallas de equipo (averías) | Tiempo perdido | 4.00 min | Ambos extractores coincidieron |
Carousel star wheel timing disturbstarwheelVer cita textual (Table 1)Carousel star wheel timing disturb 0 3 0 0 0 0 3 0.20 | Fallas de equipo (averías) | Tiempo perdido | 3.00 min | Ambos extractores coincidieron |
Crown sorter sensor malfunctioncrown sorterVer cita textual (Table 1)Crown sorter sensor malfunction 0 8 0 0 0 0 8 0.55 | Fallas de equipo (averías) | Tiempo perdido | 8.00 min | Ambos extractores coincidieron |
Discharge starwheel timingdischarge starwheelVer cita textual (Table 1)Discharge starwheel timing 0 3 0 0 0 0 3 0.20 | Fallas de equipo (averías) | Tiempo perdido | 3.00 min | Ambos extractores coincidieron |
Filler centering bell unit tripcentering bellVer cita textual (Table 1)Filler centering bell unit trip 4 2 3 0 0 0 9 0.61 | Fallas de equipo (averías) | Tiempo perdido | 9.00 min | Ambos extractores coincidieron |
BBT change over delayVer cita textual (Table 1)BBT change over delay 3 0 5 0 0 0 8 0.55 | Setups y ajustes | Tiempo perdido | 8.00 min | Ambos extractores coincidieron |
HIP problemVer cita textual (Table 1)HIP problem 0 0 10 0 0 0 10 0.68 | Fallas de equipo (averías) | Tiempo perdido | 10.0 min | Adjudicado |
ABIBUS fault fillerfillerVer cita textual (Table 1)ABIBUS fault filler 0 0 0 0 20 0 20 1.37 | Fallas de equipo (averías) | Tiempo perdido | 20.0 min | Un solo extractor |
ABIBUS fault fillerfillerVer cita textual (Table 1)ABIBUS fault filler 0 0 0 0 20 0 20 1.37 | Fallas de equipo (averías) | Proporción del tiempo perdido | 1.37 % | Un solo extractor |
BBT change over delayVer cita textual (Table 1)BBT change over delay 3 0 5 0 0 0 8 0.55 | Setups y ajustes | Proporción del tiempo perdido | 0.550 % | Un solo extractor |
Carousel star wheel timing disturbstarwheelVer cita textual (Table 1)Carousel star wheel timing disturb 0 3 0 0 0 0 3 0.20 | Fallas de equipo (averías) | Proporción del tiempo perdido | 0.200 % | Un solo extractor |
Crown hopper unit stripcrown hopperVer cita textual (Table 1)Crown hopper unit strip 0 10 0 0 0 14 24 1.64 | Fallas de equipo (averías) | Tiempo perdido | 24.0 min | Un solo extractor |
Crown hopper unit stripcrown hopperVer cita textual (Table 1)Crown hopper unit strip 0 10 0 0 0 14 24 1.64 | Fallas de equipo (averías) | Proporción del tiempo perdido | 1.64 % | Un solo extractor |
Crown stuckcrownerVer cita textual (Table 1)Crown stuck 82 88 136 95 102 158 616 42.08 | Microparos y esperas | Tiempo perdido | 616 min | Un solo extractor |
Crown stuckcrownerVer cita textual (Table 1)Crown stuck 82 88 136 95 102 158 616 42.08 | Microparos y esperas | Proporción del tiempo perdido | 42.1 % | Un solo extractor |
Crowner head settingcrowner headVer cita textual (Table 1)Crowner head setting 0 0 0 10 5 0 15 1.02 | Setups y ajustes | Tiempo perdido | 15.0 min | Un solo extractor |
Crowner head settingcrowner headVer cita textual (Table 1)Crowner head setting 0 0 0 10 5 0 15 1.02 | Setups y ajustes | Proporción del tiempo perdido | 1.02 % | Un solo extractor |
Discharge backup sensor malfunctiondischarge sensorVer cita textual (Table 1)Discharge backup sensor malfunction 0 4 0 0 0 0 4 0.27 | Fallas de equipo (averías) | Proporción del tiempo perdido | 0.270 % | Un solo extractor |
Discharge jamdischargeVer cita textual (Table 1)Discharge jam 0 0 0 10 6 9 25 1.71 | Microparos y esperas | Tiempo perdido | 25.0 min | Un solo extractor |
Discharge jamdischargeVer cita textual (Table 1)Discharge jam 0 0 0 10 6 9 25 1.71 | Microparos y esperas | Proporción del tiempo perdido | 1.71 % | Un solo extractor |
Discharge starwheel timingdischarge starwheelVer cita textual (Table 1)Discharge starwheel timing 0 3 0 0 0 0 3 0.20 | Fallas de equipo (averías) | Proporción del tiempo perdido | 0.200 % | Un solo extractor |
Fill volume settingfilling valveVer cita textual (Table 1)Fill volume setting 0 0 0 0 0 47 47 3.21 | Setups y ajustes | Tiempo perdido | 47.0 min | Un solo extractor |
Fill volume settingfilling valveVer cita textual (Table 1)Fill volume setting 0 0 0 0 0 47 47 3.21 | Setups y ajustes | Proporción del tiempo perdido | 3.21 % | Un solo extractor |
Filler centering bell unit tripcentering bellVer cita textual (Table 1)Filler centering bell unit trip 4 2 3 0 0 0 9 0.61 | Fallas de equipo (averías) | Proporción del tiempo perdido | 0.610 % | Un solo extractor |
Filler discharge backupdischargeVer cita textual (Table 1)Filler discharge backup 0 2 0 0 0 6 8 0.55 | Microparos y esperas | Tiempo perdido | 8.00 min | Un solo extractor |
Filler discharge backupdischargeVer cita textual (Table 1)Filler discharge backup 0 2 0 0 0 6 8 0.55 | Microparos y esperas | Proporción del tiempo perdido | 0.550 % | Un solo extractor |
Infeed jaminfeedVer cita textual (Table 1)Infeed jam 6 8 14 7 12 13 71 4.85 | Microparos y esperas | Tiempo perdido | 71.0 min | Un solo extractor |
Infeed jaminfeedVer cita textual (Table 1)Infeed jam 6 8 14 7 12 13 71 4.85 | Microparos y esperas | Proporción del tiempo perdido | 4.85 % | Un solo extractor |
Infeed unit tripinfeed unitVer cita textual (Table 1)Infeed unit trip 8 1 2 0 0 5 16 1.09 | Fallas de equipo (averías) | Tiempo perdido | 16.0 min | Un solo extractor |
Infeed unit tripinfeed unitVer cita textual (Table 1)Infeed unit trip 8 1 2 0 0 5 16 1.09 | Fallas de equipo (averías) | Proporción del tiempo perdido | 1.09 % | Un solo extractor |
Infeed worm timing settinginfeed wormVer cita textual (Table 1)Infeed worm timing setting 4 8 0 0 0 16 28 1.91 | Setups y ajustes | Tiempo perdido | 28.0 min | Un solo extractor |
Infeed worm timing settinginfeed wormVer cita textual (Table 1)Infeed worm timing setting 4 8 0 0 0 16 28 1.91 | Setups y ajustes | Proporción del tiempo perdido | 1.91 % | Un solo extractor |
Ring pull settingcrownerVer cita textual (Table 1)Ring pull setting 0 4 8 0 30 5 47 3.21 | Setups y ajustes | Tiempo perdido | 47.0 min | Un solo extractor |
Ring pull settingcrownerVer cita textual (Table 1)Ring pull setting 0 4 8 0 30 5 47 3.21 | Setups y ajustes | Proporción del tiempo perdido | 3.21 % | Un solo extractor |
Speed lossfillerVer cita textual (Table 1)Speed loss 244 166 46 3 0 0 459 31.35 | Velocidad reducida | Tiempo perdido | 459 min | Un solo extractor |
Speed lossfillerVer cita textual (Table 1)Speed loss 244 166 46 3 0 0 459 31.35 | Velocidad reducida | Proporción del tiempo perdido | 31.4 % | Un solo extractor |
TPO settingcapperVer cita textual (Table 1)TPO setting 0 3 0 5 0 0 8 0.55 | Setups y ajustes | Tiempo perdido | 8.00 min | Un solo extractor |
TPO settingcapperVer cita textual (Table 1)TPO setting 0 3 0 5 0 0 8 0.55 | Setups y ajustes | Proporción del tiempo perdido | 0.550 % | Un solo extractor |
Vent tube bent correction/changevent tubeVer cita textual (Table 1)Vent tube bent correction/change 0 2 0 0 10 23 35 2.39 | Fallas de equipo (averías) | Tiempo perdido | 35.0 min | Un solo extractor |
Vent tube bent correction/changevent tubeVer cita textual (Table 1)Vent tube bent correction/change 0 2 0 0 10 23 35 2.39 | Fallas de equipo (averías) | Proporción del tiempo perdido | 2.39 % | Un solo extractor |
HIP problemVer cita textual (Table 1)HIP problem 0 0 10 0 0 0 10 0.68 | No clasificable a partir del reporte | Proporción del tiempo perdido | 0.680 % | Un solo extractor |
Crown sorter sensor malfunctioncrown sorterVer cita textual (Table 1)Crown sorter sensor malfunction 0 8 0 0 0 0 8 0.55 | Fallas de equipo (averías) | Proporción del tiempo perdido | 0.550 % | Un solo extractor |
—fillerVer cita textual (Table 3)Total breakdown time (min) 125 174 307 | Fallas de equipo (averías) | Tiempo perdido | 125 min | Un solo extractor |
—fillerVer cita textual (Table 3)Total break downs 38 54 98 | Fallas de equipo (averías) | Número de eventos | 38.0 events | Un solo extractor |
—fillerVer cita textual (Table 3)MTBF (min) 206.16 162.81 151.85 | Fallas de equipo (averías) | Tiempo entre eventos | 206 min | Un solo extractor |
—fillerVer cita textual (Table 3)MTTR (min) 3.29 3.22 3.13 | Fallas de equipo (averías) | Duración media del evento | 3.29 min | Un solo extractor |
—fillerVer cita textual (Table 3)OEE (%) 86.85 87.81 85.16 | none | OEE | 86.9 % | Un solo extractor |
—fillerVer cita textual (Table 3)Total breakdown time (min) 125 174 307 | Fallas de equipo (averías) | Tiempo perdido | 174 min | Un solo extractor |
—fillerVer cita textual (Table 3)Total break downs 38 54 98 | Fallas de equipo (averías) | Número de eventos | 54.0 events | Un solo extractor |
—fillerVer cita textual (Table 3)MTBF (min) 206.16 162.81 151.85 | Fallas de equipo (averías) | Tiempo entre eventos | 163 min | Un solo extractor |
—fillerVer cita textual (Table 3)MTTR (min) 3.29 3.22 3.13 | Fallas de equipo (averías) | Duración media del evento | 3.22 min | Un solo extractor |
—fillerVer cita textual (Table 3)OEE (%) 86.85 87.81 85.16 | none | OEE | 87.8 % | Un solo extractor |
—fillerVer cita textual (Table 3)Total breakdown time (min) 125 174 307 | Fallas de equipo (averías) | Tiempo perdido | 307 min | Un solo extractor |
—fillerVer cita textual (Table 3)Total break downs 38 54 98 | Fallas de equipo (averías) | Número de eventos | 98.0 events | Un solo extractor |
—fillerVer cita textual (Table 3)MTBF (min) 206.16 162.81 151.85 | Fallas de equipo (averías) | Tiempo entre eventos | 152 min | Un solo extractor |
—fillerVer cita textual (Table 3)MTTR (min) 3.29 3.22 3.13 | Fallas de equipo (averías) | Duración media del evento | 3.13 min | Un solo extractor |
—fillerVer cita textual (Table 3)OEE (%) 86.85 87.81 85.16 | none | OEE | 85.2 % | Un solo extractor |
Crown hopper unit stripcrown hopper unitVer cita textual (Table 1, row 4)4 | Crown hopper unit strip | 0 | 10 | 0 | 0 | 0 | 14 | 24 | 1.64 | Fallas de equipo (averías) | Tiempo perdido | 10.0 min | Un solo extractor |
Filler discharge backupfiller dischargeVer cita textual (Table 1, row 12)12 | Filler discharge backup | 0 | 2 | 0 | 0 | 0 | 6 | 8 | 0.55 | Fallas de equipo (averías) | Tiempo perdido | 2.00 min | Un solo extractor |
TPO settingVer cita textual (Table 1, row 18)18 | TPO setting | 0 | 3 | 0 | 5 | 0 | 0 | 8 | 0.55 | Setups y ajustes | Tiempo perdido | 3.00 min | Un solo extractor |
Vent tube bent correction/changevent tubeVer cita textual (Table 1, row 19)19 | Vent tube bent correction/change | 0 | 2 | 0 | 0 | 10 | 23 | 35 | 2.39 | Fallas de equipo (averías) | Tiempo perdido | 2.00 min | Un solo extractor |
ABIBUS fault fillerfillerVer cita textual (Table 1, row 1)1 | ABIBUS fault filler | 0 | 0 | 0 | 0 | 20 | 0 | 20 | 1.37 | Fallas de equipo (averías) | Tiempo perdido | 20.0 min | Un solo extractor |
Crown hopper unit stripcrown hopper unitVer cita textual (Table 1, row 4)4 | Crown hopper unit strip | 0 | 10 | 0 | 0 | 0 | 14 | 24 | 1.64 | Fallas de equipo (averías) | Tiempo perdido | 14.0 min | Un solo extractor |
Crowner head settingcrowner headVer cita textual (Table 1, row 6)6 | Crowner head setting | 0 | 0 | 0 | 10 | 5 | 0 | 15 | 1.02 | Setups y ajustes | Tiempo perdido | 15.0 min | Un solo extractor |
Discharge jamdischarge areaVer cita textual (Table 1, row 8)8 | Discharge jam | 0 | 0 | 0 | 10 | 6 | 9 | 25 | 1.71 | Microparos y esperas | Tiempo perdido | 25.0 min | Un solo extractor |
Fill volume settingfill volume unitVer cita textual (Table 1, row 10)10 | Fill volume setting | 0 | 0 | 0 | 0 | 0 | 47 | 47 | 3.21 | Setups y ajustes | Tiempo perdido | 47.0 min | Un solo extractor |
Filler discharge backupfiller dischargeVer cita textual (Table 1, row 12)12 | Filler discharge backup | 0 | 2 | 0 | 0 | 0 | 6 | 8 | 0.55 | Fallas de equipo (averías) | Tiempo perdido | 6.00 min | Un solo extractor |
Infeed unit tripinfeed unitVer cita textual (Table 1, row 14)14 | Infeed unit trip | 8 | 1 | 2 | 0 | 0 | 5 | 16 | 1.09 | Fallas de equipo (averías) | Tiempo perdido | 5.00 min | Un solo extractor |
Infeed worm timing settinginfeed wormVer cita textual (Table 1, row 15)15 | Infeed worm timing setting | 4 | 8 | 0 | 0 | 0 | 16 | 28 | 1.91 | Setups y ajustes | Tiempo perdido | 16.0 min | Un solo extractor |
Speed lossfiller machineVer cita textual (Table 1, row 17)17 | Speed loss | 244 | 166 | 46 | 3 | 0 | 0 | 459 | 31.35 | Velocidad reducida | Tiempo perdido | 3.00 min | Un solo extractor |
TPO settingVer cita textual (Table 1, row 18)18 | TPO setting | 0 | 3 | 0 | 5 | 0 | 0 | 8 | 0.55 | Setups y ajustes | Tiempo perdido | 5.00 min | Un solo extractor |
Unidades de observación
- Glass bottle filler machine · Llenado · Línea base
- Glass bottle filler machine · Llenado · Después de la intervención
- Filler machine · Llenado · Línea base
- Filler machine · Llenado · Después de la intervención

