foratvise
Comenzar
Estudio incluido

Applying Lean Manufacturing tools to minimize waste in a mass consumption food company

Abrir fuente

1Ficha bibliográfica

Autores
Lagos, Maricielo, Luis, Katsuhiro Nishizawa, Ramos, Edgar
Año
2022
Publicación
—
DOI
—
País
Peru
Segmento
Panadería y pastas
Familia de procesos
Formado, horneado y cocción
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
—
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
For the case study, a line is chosen where 4 types of crackers or salty cookies are produced, which we will call cookies type A, type B, type C and type D.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 10Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—
Ver cita textual (Stage IV: Analysis after improvement / Fig. 8)
In the graph, the material yield of the type D biscuit had an increase from 96.7 percent to 98.9 percent.
noneRendimiento másico98.9 %Ambos extractores coincidieron
—
Ver cita textual (Stage IV: Analysis after improvement / Fig. 7)
The results indicate that the OEE of the type D cookie had an increase from 83.2 percent to 86.7 percent.
noneOEE86.7 %Ambos extractores coincidieron
—
Ver cita textual (Stage IV: Analysis after improvement / Fig. 8)
In the graph, the material yield of the type D biscuit had an increase from 96.7 percent to 98.9 percent.
noneRendimiento másico96.7 %Ambos extractores coincidieron
—
Ver cita textual (Stage IV: Analysis after improvement / Fig. 7)
The results indicate that the OEE of the type D cookie had an increase from 83.2 percent to 86.7 percent.
noneOEE83.2 %Ambos extractores coincidieron
—
Ver cita textual (Section IV.A Main Problem)
Likewise, according to the OEE, the internal target of 86.9% having an average of 84%.
noneOEE84.0 %Un solo extractor
—
Ver cita textual (Section IV.A Main Problem)
The material performance indicator reflects that the internal objective of 99% in production during 2021 was not achieved, having an average of 97% in the production of type D biscuits.
noneRendimiento másico97.0 %Un solo extractor
downtime
Ver cita textual (Section IV.B Model and tools)
For the downtime that generates 35% of the waste in the production of type D biscuits, the TPM tool will be used since these downtimes are reflected in machine breakdowns, unplanned stops and minor stoppages.
No clasificable a partir del reporteProporción del tiempo perdido35.0 %Un solo extractor
shrinkage
Ver cita textual (Stage III: Proposal for improvement and implementation)
The second main cause of waste is shrinkage, which represents 65% of losses.
No clasificable a partir del reporteProporción del tiempo perdido65.0 %Un solo extractor
poorly sealed packagesprimary packing machine
Ver cita textual (Stage III: Proposal for improvement and implementation / Fig. 6)
as a result there were poorly sealed packages, generating defective products, approximately 23% of the total loss in the production of type D biscuits.
Defectos de proceso (desecho y reproceso)Proporción del tiempo perdido23.0 %Un solo extractor
—
Ver cita textual (Page 4, Main Problem section)
The material performance indicator reflects that the internal objective of 99% in production during 2021 was not achieved, having an average of 97% in the production of type D biscuits.
noneDisponibilidad97.0 %Un solo extractor

Unidades de observación

  • Type D cookie production line · Línea completa o equipo sin especificar · Después de la intervención
  • Type D cookie production line · Línea completa o equipo sin especificar · Línea base