Estudio incluido
การเพิ่มผลผลิตด้วยวิธีการปรับปรุงประสิทธิผลโดยรวมของเครื่องจักร : กรณีศึกษา โรงงานผลิตอาหารสัตว์
1Ficha bibliográfica
- Autores
- วีรชัย มัฎฐารักษ์, วิมล จันนินวงศ์
- Año
- 2010
- Publicación
- The Journal Of Industrial Technology
- DOI
- —
- País
- Thailand
- Segmento
- Alimento animal y para mascotas
- Familia de procesos
- Formado, horneado y cocción
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 2 líneas · 3 máquinas
- Periodo de observación
- 90 días
- Recolección de datos
- manual_logs
- Intervención
Ver el contexto tal como lo describe el estudio
การศึกษาครั้งนี้มีวัตถุประสงคเพื่อตองการเพิ่มผลผลิตดวยวิธีการ OEE หรือการปรับปรุงคาประสิทธิผลโดยรวมของเครื่องจักรอัดเม็ดในโรงงานผลิตอาหารสัตวน้ํา
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 9Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—MP30Ver cita textual (Table 6)MP 30 75.42 93.72 18.31% | none | OEE | 75.4 % | Ambos extractores coincidieron |
—C07Ver cita textual (Table 6)C07 73.88 85.97 12.09% | none | OEE | 73.9 % | Ambos extractores coincidieron |
Waiting Time for raw material (รอวัตถุดิบ)C06Ver cita textual (Table 4)รอวัตถุดิบ(Waiting Time) 10.08 | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Tiempo perdido | 10.1 h | Ambos extractores coincidieron |
Machine Adjustment (ปรับตั้งเครื่องจักร)C06Ver cita textual (Table 4)ปรับตั้งเครื่องจักร 15.83 | Setups y ajustes | Tiempo perdido | 15.8 h | Ambos extractores coincidieron |
Die Change (เปลี่ยน DIE)C06Ver cita textual (Table 4)เปลี่ยน DIE 12.17 | Setups y ajustes | Tiempo perdido | 12.2 h | Ambos extractores coincidieron |
Break Down (เสียรอซอม)C06Ver cita textual (Table 4)เสียรอซอม(Break Down) 5.33 | Fallas de equipo (averías) | Tiempo perdido | 5.33 h | Ambos extractores coincidieron |
—C06Ver cita textual (Table 6)C06 74.59 83.22 8.63% | none | OEE | 74.6 % | Ambos extractores coincidieron |
Clear line / recipe change (Clear line เปลี่ยนสูตร)C06Ver cita textual (Table 4)Clear line เปลี่ยนสูตร 25.4 | Setups y ajustes | Tiempo perdido | 25.4 h | Ambos extractores coincidieron |
Production stop (หยุดผลิต)C06Ver cita textual (Table 3)หยุดผลิต 8 | Paro planificado (mantenimiento programado, descansos, sin demanda) | Tiempo perdido | 8.00 h | Un solo extractor |
Cleaning (ทําความสะอาด)C06Ver cita textual (Table 3)ทําความสะอาด 0 | Paro planificado (mantenimiento programado, descansos, sin demanda) | Tiempo perdido | 0 h | Un solo extractor |
Short pellet size (ขนาดเม็ดสั้น)C06Ver cita textual (Table 5)ขนาดเม็ดสั้น 0.60 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 0.600 ตัน | Un solo extractor |
Two colors (สองสี)C06Ver cita textual (Table 5)สองสี 1.20 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 1.20 ตัน | Un solo extractor |
Wet lump (กอนเปยกปน)C06Ver cita textual (Table 5)กอนเปยกปน 0.00 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 0 ตัน | Un solo extractor |
Excess dust (ฝุนเกินมาตรฐาน)C06Ver cita textual (Table 5)ฝุนเกินมาตรฐาน 0.00 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 0 ตัน | Un solo extractor |
Burnt pellet (เม็ดไหม)C06Ver cita textual (Table 5)เม็ดไหม 0.50 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 0.500 ตัน | Un solo extractor |
Durability test failure (คาความคงทนไมผาน)C06Ver cita textual (Table 5)คาความคงทนไมผาน 0.00 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 0 ตัน | Un solo extractor |
ReprocessC06Ver cita textual (Table 5)Reprocess 59.37 | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 59.4 ตัน | Un solo extractor |
—C06Ver cita textual (Table 6)C06 74.59 83.22 8.63% | none | OEE | 83.2 % | Un solo extractor |
—C07Ver cita textual (Table 6)C07 73.88 85.97 12.09% | none | OEE | 86.0 % | Un solo extractor |
—MP30Ver cita textual (Table 6)MP 30 75.42 93.72 18.31% | none | OEE | 93.7 % | Un solo extractor |
Break DownVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Fallas de equipo (averías) | Tiempo perdido | 38.3 h | Un solo extractor |
Break DownVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Fallas de equipo (averías) | Proporción del tiempo perdido | 6.50 % | Un solo extractor |
Machine AdjustmentVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setups y ajustes | Tiempo perdido | 105 h | Un solo extractor |
Machine AdjustmentVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setups y ajustes | Proporción del tiempo perdido | 17.9 % | Un solo extractor |
Die ChangeVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setups y ajustes | Tiempo perdido | 112 h | Un solo extractor |
Die ChangeVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setups y ajustes | Proporción del tiempo perdido | 19.1 % | Un solo extractor |
Waiting TimeVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Tiempo perdido | 150 h | Un solo extractor |
Waiting TimeVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Proporción del tiempo perdido | 25.5 % | Un solo extractor |
ClearlineVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setups y ajustes | Tiempo perdido | 182 h | Un solo extractor |
ClearlineVer cita textual (Figure 3 Pareto Chart for Cause)Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9 | Setups y ajustes | Proporción del tiempo perdido | 30.9 % | Un solo extractor |
Unidades de observación
- MP30 · Extrusión · Línea base
- C07 · Extrusión · Línea base
- C06 · Extrusión · Línea base
- C06 · Extrusión · Después de la intervención
- C07 · Extrusión · Después de la intervención
- MP30 · Extrusión · Después de la intervención
- Pelleting machines C06+C07+MP30 (combined, pre-improvement Pareto) · Extrusión · Línea base

