Estudio incluido
USULAN PENINGKATAN EFEKTIVITAS MESIN CETAK MANUAL MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) (STUDI KASUS DI PERUSAHAAN KERUPUK TTN)
1Ficha bibliográfica
- Autores
- Delia Fitri Rahmadhani, Harsono Taroepratjeka, Lisye Fitria
- Año
- 2014
- Publicación
- REKA INTEGRA
- DOI
- —
- País
- Indonesia
- Segmento
- Snacks, café, té y otros alimentos
- Familia de procesos
- Formado, horneado y cocción
- Tipo de estudio
- Estudio de caso único
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · 1 máquinas
- Periodo de observación
- 30 días
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
Perusahaan Kerupuk TTN adalah salah satu perusahaan kerupuk di Kota Bandung.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 10Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—mesin cetak manualVer cita textual (Table 3)Total 240000 4246 98,231 | none | Calidad | 98.2 % | Ambos extractores coincidieron |
—mesin cetak manualVer cita textual (Table 2)Total 4050 235754 85.604 | none | Rendimiento | 85.6 % | Ambos extractores coincidieron |
—mesin cetak manualVer cita textual (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | none | Disponibilidad | 73.6 % | Ambos extractores coincidieron |
—mesin cetak manualVer cita textual (Section 5 Analisis / Table 4)Dari hasil perhitungan yang telah dilakukan, didapatkan rata-rata nilai OEE untuk bulan April 2014 adalah sebesar 61,920%. | none | OEE | 61.9 % | Ambos extractores coincidieron |
Equipment Failure Lossesmesin cetak manualVer cita textual (Section 4.5, point 1)= 1942 10200 𝑥 100% = 19,039% | Fallas de equipo (averías) | Proporción del tiempo planificado | 19.0 % | Un solo extractor |
Setup and Adjustment Lossesmesin cetak manualVer cita textual (Section 4.5, point 2)= 750 10200 𝑥 100% = 7,353 | Setups y ajustes | Proporción del tiempo planificado | 7.35 % | Un solo extractor |
Idle and Minor Stoppage Lossesmesin cetak manualVer cita textual (Section 4.5, point 3)= (240000−235754)𝑥 0,015 10200 = 0,573% | Microparos y esperas | Proporción del tiempo planificado | 0.573 % | Un solo extractor |
Reduce Speed Lossesmesin cetak manualVer cita textual (Section 4.5, point 4)= (0,032 −0,015)𝑥 235754 10200 𝑥 100% = 39,292% | Velocidad reducida | Proporción del tiempo planificado | 39.3 % | Un solo extractor |
Defect Lossesmesin cetak manualVer cita textual (Section 4.5, point 5)= 4246 𝑥 0,015 10200 𝑥 100% = 0,624% | Defectos de proceso (desecho y reproceso) | Proporción del tiempo planificado | 0.624 % | Un solo extractor |
—mesin cetak manualVer cita textual (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | Fallas de equipo (averías) | Tiempo perdido | 1,942 min | Un solo extractor |
—mesin cetak manualVer cita textual (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | Setups y ajustes | Tiempo perdido | 750 min | Un solo extractor |
—mesin cetak manualVer cita textual (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | Paro planificado (mantenimiento programado, descansos, sin demanda) | Tiempo perdido | 600 min | Un solo extractor |
Unidades de observación
- Mesin Cetak Manual · Formado, moldeado y dosificado · Línea base

