foratvise
Comenzar
Estudio incluido

Proposal for OEE (Overall Equipment Effectiveness) Indicator Deployment in a Beverage Plant

Abrir fuente

1Ficha bibliográfica

Autores
Fabiana Pereira Castro, Fernando Oliveira de Araújo
Año
2012
Publicación
Brazilian Journal of Operations & Production Management
País
Brazil
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Estudio de caso único
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
11 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
The investigation is limited to monitoring the OEE indicator in a machine for filling beverage in PET bottles of 1500 mL, operating in a continuous regime of approximately 4,800 units per hour.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 11Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
Problem in the filler (code 6003)filler
Ver cita textual (Line Downtimes section / Figure 3)
The code 6003, referring to downtimes caused by problems with the filler, consumed 473 minutes, having occurred 44 times during the period assessed in this work (Figure 3).
Fallas de equipo (averías)Número de eventos44.0 eventsAdjudicado
Problem in the filler (code 6003)filler
Ver cita textual (Line Downtimes section / Figure 3)
The code 6003, referring to downtimes caused by problems with the filler, consumed 473 minutes, having occurred 44 times during the period assessed in this work (Figure 3).
Fallas de equipo (averías)Tiempo perdido473 minAdjudicado
Problem in the inkjet printer (code 6004)inkjet printer
Ver cita textual (Line Downtimes section)
the company spent 245 and 273 minutes to repair the equipment between the studied days 04 and 05.
Fallas de equipo (averías)Tiempo perdido273 minAmbos extractores coincidieron
Problem in the inkjet printer (code 6004)inkjet printer
Ver cita textual (Line Downtimes section)
the company spent 245 and 273 minutes to repair the equipment between the studied days 04 and 05.
Fallas de equipo (averías)Tiempo perdido245 minAmbos extractores coincidieron
Discarded PET bottles (waste)filler
Ver cita textual (OEE section, text)
According to the history, the waste of these bottles was around 3%.
Defectos de proceso (desecho y reproceso)Tasa de defectos3.00 %Ambos extractores coincidieron
—
Ver cita textual (Analysis and Result Discussion / Figure 4)
On day 09, the third figure below the expected (33%) was a result of successive electrical problems in the packing, inkjet printer and filler, respectively, compromising the final index.
noneOEE33.0 %Ambos extractores coincidieron
—
Ver cita textual (Analysis and Result Discussion / Figure 4)
The days 04 and 05 show the smallest figures of the OEE, 8 and 11%, respectively.
noneOEE11.0 %Ambos extractores coincidieron
—
Ver cita textual (Analysis and Result Discussion / Figure 4)
The days 04 and 05 show the smallest figures of the OEE, 8 and 11%, respectively.
noneOEE8.00 %Ambos extractores coincidieron
Return/reuse of after-filling PET bottlesfiller
Ver cita textual (Table 3)
According to Table 3, an average of 3.6% of the bottles in good conditions of use was reutilized for new bottling processes.
Defectos de proceso (desecho y reproceso)Tasa de defectos3.60 %Ambos extractores coincidieron
Short mechanical interventions in the filler for small adjustments (3-15 min interval)filler
Ver cita textual (Figure 3)
the major occurrences of line downtimes consumed between 3 and 15 minutes of production, in equivalent proportions, summing 287 minutes (61% of the whole time) and characterizing the effectuation of short mechanical interventions in the filler for small adjustments (Figure 3).
Fallas de equipo (averías)Proporción del tiempo perdido61.0 %Adjudicado
Short mechanical interventions in the filler for small adjustments (3-15 min interval)filler
Ver cita textual (Figure 3)
the major occurrences of line downtimes consumed between 3 and 15 minutes of production, in equivalent proportions, summing 287 minutes (61% of the whole time) and characterizing the effectuation of short mechanical interventions in the filler for small adjustments (Figure 3).
Fallas de equipo (averías)Tiempo perdido287 minAdjudicado
—
Ver cita textual (Page 11)
Even though the process shows expressive figures for the Quality indicator, between 93 and 98%
noneCalidad93.0 %Un solo extractor
—
Ver cita textual (Page 11)
Even though the process shows expressive figures for the Quality indicator, between 93 and 98%
noneCalidad98.0 %Un solo extractor

Unidades de observación

  • Beverage PET bottling production line · Línea completa o equipo sin especificar · Línea base
  • PET bottle filling line · Llenado · Línea base