foratvise
Comenzar
Estudio incluido

ANALISIS PERHITUNGAN EFEKTIFITAS MESIN FILLER LINE LAB MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) (Studi Kasus di PT. X)

Abrir fuente

1Ficha bibliográfica

Autores
Lutfan Edison Abdullah, Bambang Purwanggono
Año
2016
Publicación
Industrial Engineering Online Journal
DOI
—
País
Indonesia
Segmento
Productos lácteos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Estudio de caso único
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 2 líneas · 2 máquinas
Periodo de observación
15 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
Produksi utama PT.X adalah susu murni dalam kemasan dimana setiap harinya mampu memproduksi sebanyak 100 ton susu murni yang diperoleh dari penghasil susu disekitar Bandung.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—filler LAB
Ver cita textual (Section 3, Availability Factor (Faktor Ketersediaan), page 4)
Total downtime selama 15 hari kerja pada bulan Februari 2014 adalah 107,61 jam.
No clasificable a partir del reporteTiempo perdido108 jamAmbos extractores coincidieron
—filler LAB
Ver cita textual (Section 3, Performance Rate (Faktor Performansi), page 4)
Maka dapat diketahui Performance Factor Line LAB adalah sebesar 92%
noneRendimiento92.0 %Ambos extractores coincidieron
—filler LAB
Ver cita textual (Section 3, Availability Factor (Faktor Ketersediaan), page 4)
Maka dapat diketahui Availibility Factor Line LAB adalah sebesar 84%
noneDisponibilidad84.0 %Ambos extractores coincidieron
—filler LAB
Ver cita textual (Section 3, Overall Equipment Effectiveness, page 5)
Dari perhitungan di atas maka diketahui nilai Overall Equipment Effectiveness (OEE) dari Line LAB PT.X sebesar 77%.
noneOEE77.0 %Ambos extractores coincidieron
—filler LAB
Ver cita textual (Section 3, Quality Factor (Faktor Kualitas), page 4-5)
Maka dapat diketahui Quality Factor Line LAB adalah sebesar 98%
noneCalidad98.0 %Un solo extractor
CIP (clean in proses)filler LAB
Ver cita textual (Lanjutan Tabel 2, Data Utilisasi Mesin LAB, page 4)
Total 107.61 6.469 638.570 49.660
Setups y ajustesTiempo perdido49.7 jamUn solo extractor
—
Ver cita textual (Page 5, Kesimpulan section)
tingkat quality 99%
noneCalidad99.0 %Un solo extractor

Unidades de observación

  • Line LAB · Llenado · Línea base
  • LAB Line 2 filler · Llenado · Línea base