foratvise
Comenzar
Estudio incluido

PERENCANAAN TOTAL PRODUCTIVE MAINTENANCE(TPM) UNTUK MENINGKATKAN PRODUKTIVITAS STASIUN GILINGAN PADA PG KEBON AGUNG

Abrir fuente

1Ficha bibliográfica

Autores
Mochammad Harits Trysnawan Amaanullah, Rina Sandora, Pranowo Sidi
Año
2017
Publicación
Seminar K3
DOI
—
País
Indonesia
Segmento
Azúcar y confitería
Familia de procesos
Molienda, extracción y separación
Tipo de estudio
Estudio de caso único
Alcance de la extracción
Solo resumen
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
510 días
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
PG Kebon Agung has 15.000 TCD set milling capacity and 12.500 TCD effective milling capacity.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 7Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
machinery damage (breakdown)milling station
Ver cita textual (abstract)
machinery damage leads to milling stops for about 766.61 hours which affect to a not optimum production process.
Fallas de equipo (averías)Tiempo perdido767 hoursAmbos extractores coincidieron
—milling station
Ver cita textual (abstract)
OEE number on 2014-2016 ranged on 78.15% until 83.18%.
noneOEE78.2 %Un solo extractor
—milling station
Ver cita textual (abstract)
OEE number on 2014-2016 ranged on 78.15% until 83.18%.
noneOEE83.2 %Un solo extractor

Unidades de observación

  • Stasiun Gilingan (milling station) · Molienda · Línea base