foratvise
Comenzar
Estudio incluido

The use of the SMED method in improvement of production enterprises

Abrir fuente

1Ficha bibliográfica

Autores
Joanna Stuglik, Zofia Gródek-Szostak, Danuta Kajrunajtys
Año
2019
Publicación
E3S Web of Conferences
País
—
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Solo resumen
Tamaño
1 plantas · 1 líneas · 1 máquinas
Periodo de observación
—
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
For the purposes of this study, a single bottling line for filling 200 ml and 250 ml glass bottles with carbonated drinks was selected.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 6Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
mixer washingmixer
Ver cita textual (Abstract)
the total single washing time was 5 hours 3 minutes on average, which accounted for about 19% of the total retooling of the production line
Setups y ajustesProporción del tiempo perdido19.0 %Ambos extractores coincidieron

Unidades de observación

  • Bottling line - mixer washing · Limpieza CIP y sanitización · Línea base