foratvise
Comenzar
Estudio incluido

Penerapan Metode Total Productive Maintenance untuk Mereduksi Downtime pada Lini Produksi Botol 1 di PT. Grahamas Intitirta

Abrir fuente

1Ficha bibliográfica

Autores
Afifah Azra Laila, Chaznin R. Muhammad, Nita P.A Hidayat
Año
2020
Publicación
Prosiding Teknik Industri
DOI
—
País
Indonesia
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Solo resumen
Tamaño
1 plantas · 1 líneas · 2 máquinas
Periodo de observación
—
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
PT. Grahamas Intitirta (PT. GI) is a mineral water company.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 4Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—Blowing 1
Ver cita textual (abstract)
The results showed that the Filling 1 and Blowing 1 had an Overall Equipment Effectiveness (OEE) below the standard, namely 76.13% and 83.32%.
noneOEE83.3 %Ambos extractores coincidieron
—Filling 1
Ver cita textual (abstract)
The results showed that the Filling 1 and Blowing 1 had an Overall Equipment Effectiveness (OEE) below the standard, namely 76.13% and 83.32%.
noneOEE76.1 %Ambos extractores coincidieron
downtimeFilling 1
Ver cita textual (abstract)
This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours.
No clasificable a partir del reporteTiempo perdido394 hoursAdjudicado
downtimeBlowing 1
Ver cita textual (abstract)
This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours.
No clasificable a partir del reporteTiempo perdido91.4 hoursAdjudicado
breakdown lossFilling 1
Ver cita textual (Abstract, Results section)
This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours.
Fallas de equipo (averías)Tiempo perdido67.6 hUn solo extractor
defect lossBlowing 1
Ver cita textual (Abstract, Results section)
This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours.
Defectos de proceso (desecho y reproceso)Tiempo perdido14.8 hUn solo extractor

Unidades de observación

  • Blowing 1 · Formado, moldeado y dosificado · Línea base
  • Filling 1 · Llenado · Línea base
  • Filling 1 · Llenado · Después de la intervención
  • Blowing 1 · Formado, moldeado y dosificado · Después de la intervención