foratvise
Comenzar
Estudio incluido

Mitigating solids loss and waste in processed cheese production

Abrir fuente

1Ficha bibliográfica

Autores
Daniel M. Sterckx
Año
2020
Publicación
Minds at UW (University of Wisconsin)
DOI
—
País
United States
Segmento
Productos lácteos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
84 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
At one domestic plant, Plant A, the natural shred line ran from 28 to 30 million pounds per year, whereas the processed lines ran in excess of 135 million pounds per year.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 9Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
wrapper error wastewrapper
Ver cita textual (Chapter IV, Addressing Equipment Error)
Prior to the start of the project, an average of 148,900 pounds of cheese salvage was created weekly as a result of wrapper error waste. This translated into a 10.24% salvage rate.
Defectos de proceso (desecho y reproceso)Tasa de defectos10.2 %Adjudicado
Equipment Failures
Ver cita textual (Table 1)
590 Equipment Failures
Fallas de equipo (averías)Tiempo perdido590 minUn solo extractor
Pump Replacementspump
Ver cita textual (Table 1)
411 Pump Replacements
Fallas de equipo (averías)Tiempo perdido411 minUn solo extractor
Lecithin Issues
Ver cita textual (Table 1)
235 Lecithin Issues
Paros organizacionales o externos (falta de material o personal, corte de servicios)Tiempo perdido235 minUn solo extractor
late startups
Ver cita textual (Chapter IV, Addressing Human Error)
Upon initial review, production was late on average 31 minutes per week over the 26-week period.
Setups y ajustesTiempo perdido31.0 min/weekUn solo extractor
lost production time (late start-ups and work stoppages)
Ver cita textual (Chapter V, Addressing human waste)
For a 26-week period prior to starting the project, a cumulative 14 hours of lost production time was observed.
No clasificable a partir del reporteTiempo perdido14.0 hUn solo extractor
—line_unspecified
Ver cita textual (Chapter V, Addressing human waste)
For every hour the line was down, 20,000 pounds of cheese production was lost.
noneCapacidad de producción20,000 lbs/hUn solo extractor
bottom seal/end seal issueswrapper
Ver cita textual (Chapter V, page 41)
Since centerlining the wrappers and running at ideal settings, at the close of the project, Company XYZ was running at 120,900 pounds of salvage per week.
Defectos de proceso (desecho y reproceso)Tasa de defectos120,900 lbs/weekUn solo extractor
Blender scrape down processblender
Ver cita textual (Chapter V, page 42)
This (on average) prevented 2,000 pounds of cheese being diverted to solids recovery tanks per week.
Paros organizacionales o externos (falta de material o personal, corte de servicios)Tiempo perdido2,000 lbsUn solo extractor

Unidades de observación

  • Processed Cheese Casting Line (Plant A) · Línea completa o equipo sin especificar · Línea base
  • Processed Cheese Production Line · Línea completa o equipo sin especificar · Después de la intervención