foratvise
Comenzar
Estudio incluido

Ways of improvement of technological equipment performance

Abrir fuente

1Ficha bibliográfica

Autores
M. B. Smirnov, Galiya Abdilova
Año
2021
Publicación
Theory and practice of meat processing
País
Kazakhstan
Segmento
Carne, aves y pescado
Familia de procesos
Formado, horneado y cocción
Tipo de estudio
Estudio de caso único
Alcance de la extracción
Texto completo
Tamaño
1 plantas · — líneas · 1 máquinas
Periodo de observación
1 días
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
In order to identify losses associated with the operation of the equipment, the operation of vacuum filler for stuffing sausages, installed at one of the small company of the city, was studied and analyzed.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—vacuum filler
Ver cita textual (Figure 6)
Current productivity (CP) is equal to CP = PP – SD = 800 kg. – 192 kg. = 608 kg.
noneCapacidad de producción608 kgAmbos extractores coincidieron
Readjustment of equipment; Interruptions in the supply of raw materialsvacuum filler
Ver cita textual (Figure 5)
Downtime (Dt) – ПР = 82 min.: Readjustment of equipment; Interruptions in the supply of raw materials.
No clasificable a partir del reporteTiempo perdido82.0 minAmbos extractores coincidieron
—vacuum filler
Ver cita textual (Abstract)
The availability index is 0.79, the productivity index is 0.76, and the product quality index is 0.95.
noneDisponibilidad0.790 fractionUn solo extractor
—vacuum filler
Ver cita textual (Abstract)
The availability index is 0.79, the productivity index is 0.76, and the product quality index is 0.95.
noneRendimiento0.760 fractionUn solo extractor
—vacuum filler
Ver cita textual (Abstract)
The availability index is 0.79, the productivity index is 0.76, and the product quality index is 0.95.
noneCalidad0.950 fractionUn solo extractor
—vacuum filler
Ver cita textual (Abstract)
the overall equipment effectiveness (OEE) accounts for 57%
noneOEE57.0 %Un solo extractor
Short breaksvacuum filler
Ver cita textual (Figure 5)
Short breaks (ShB) 2 times per 15 min. – 30 min.
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido30.0 minUn solo extractor
Lunchvacuum filler
Ver cita textual (Figure 5)
Lunch (L) 1 times per 60 min. – 60 min.
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido60.0 minUn solo extractor
Idle operation with short-term stops of the equipment; Running of the equipment at a decreased speedvacuum filler
Ver cita textual (Figure 6)
The loss in speed during the operation of the equipment led to a decrease in productivity by 192 kg., i.е. SD = 192 kg.
Velocidad reducidaTiempo perdido192 kgUn solo extractor
defect productvacuum filler
Ver cita textual (Figure 7)
The losses from defect products caused by the disruption of the production process and the reduction in the production volume amounted to LDP = 30 kg.
Defectos de proceso (desecho y reproceso)Tiempo perdido30.0 kgUn solo extractor

Unidades de observación

  • Vacuum filler (sausage stuffer) · Llenado · Línea base