foratvise
Comenzar
Estudio incluido

Total Productive Maintenance Model applying SMED and FMEA to increase the overall efficiency of equipment (OEE) in the food sector

Abrir fuente

1Ficha bibliográfica

Autores
Ernesto Altamirano-Flores, Karen Caballero-Rojas, Oscar Palacios-Aguilar
Año
2021
Publicación
AHFE international
País
Peru
Segmento
Manufactura de alimentos (sin especificar o mixta)
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · 2 máquinas
Periodo de observación
182 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
This case study will be carried out within the production process of sauces, whose production process is classified into two main sub-processes: manufactur-ing and packaging, which make up the entire production line.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 9Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—Volpak 7
Ver cita textual (Figure 2 / Design of the validation section)
there was a notable increase in the OEE of the Volpak 7, reaching 60% in the month of October.
noneOEE60.0 %Ambos extractores coincidieron
—Volpak 7
Ver cita textual (Initial diagnosis section)
The availability represented the lowest rate of the OEE com-ponents with a value of 51.46%
noneDisponibilidad51.5 %Ambos extractores coincidieron
CIP wash stopCIP system
Ver cita textual (Initial diagnosis section)
The stop that represents the largest proportion is the CIP wash stop, which represents a stop time of approximately 16 hours.
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido16.0 hAdjudicado
CIP wash stop (maximum recorded)CIP system
Ver cita textual (Initial diagnosis section)
the plant management recorded washing times that exceeded the planned one, occupying a maximum of 26 stop-page hours
Fallas de equipo (averías)Tiempo perdido26.0 hAmbos extractores coincidieron
—Volpak 7
Ver cita textual (Table 1)
OEE (volpak 7) 45.37% 43.96% 41.67%
noneOEE45.4 %Un solo extractor
—Volpak 7
Ver cita textual (Table 1)
OEE (volpak 7) 45.37% 43.96% 41.67%
noneOEE44.0 %Un solo extractor
—Volpak 7
Ver cita textual (Table 1)
OEE (volpak 7) 45.37% 43.96% 41.67%
noneOEE41.7 %Un solo extractor
—Volpak 7
Ver cita textual (Table 1)
MTTR (volpak 7) 2.63 4.41 3.75
noneTiempo entre eventos2.63 hUn solo extractor
—Volpak 7
Ver cita textual (Table 1)
MTTR (volpak 7) 2.63 4.41 3.75
noneTiempo entre eventos4.41 hUn solo extractor
—Volpak 7
Ver cita textual (Table 1)
MTTR (volpak 7) 2.63 4.41 3.75
noneTiempo entre eventos3.75 hUn solo extractor
—Volpak 7
Ver cita textual (Table 1)
MTBF (volpak 7) 69.37 85.59 61.70
noneTiempo entre eventos69.4 hUn solo extractor
—Volpak 7
Ver cita textual (Table 1)
MTBF (volpak 7) 69.37 85.59 61.70
noneTiempo entre eventos85.6 hUn solo extractor
—Volpak 7
Ver cita textual (Table 1)
MTBF (volpak 7) 69.37 85.59 61.70
noneTiempo entre eventos61.7 hUn solo extractor
—CIP system
Ver cita textual (Table 1)
MTTR (system CIP) 10.26 11.18 10.64
noneTiempo entre eventos10.3 hUn solo extractor
—CIP system
Ver cita textual (Table 1)
MTTR (system CIP) 10.26 11.18 10.64
noneTiempo entre eventos11.2 hUn solo extractor
—CIP system
Ver cita textual (Table 1)
MTTR (system CIP) 10.26 11.18 10.64
noneTiempo entre eventos10.6 hUn solo extractor
—CIP system
Ver cita textual (Table 1)
MTBF (system CIP) 14.22 18.29 16
noneTiempo entre eventos14.2 hUn solo extractor
—CIP system
Ver cita textual (Table 1)
MTBF (system CIP) 14.22 18.29 16
noneTiempo entre eventos18.3 hUn solo extractor
—CIP system
Ver cita textual (Table 1)
MTBF (system CIP) 14.22 18.29 16
noneTiempo entre eventos16.0 hUn solo extractor

Unidades de observación

  • Volpak 7 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Volpak 7 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • CIP system · Limpieza CIP y sanitización · Línea base