foratvise
Comenzar
Estudio incluido

An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime

Abrir fuente

1Ficha bibliográfica

Autores
Duy Ly-Anh, An Phan-Hoang, Dung Le-Phuong, Quynh-Lam Ngoc Le, Do Ngoc Hien
Año
2023
Publicación
International Journal of Science and Research Archive
País
Vietnam
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
—
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
The research would present an effective performance of lean tools implementing in an Lemon Tea processing line of a Drink Industry as a case study.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 8Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
waiting time for syrup, filler, packer, sleever, conveyor
Ver cita textual (Section 2.1 / Figure 2)
The machine downtime is recognized as a critical problem of the waiting time for syrup, filler, packer, sleever, conveyor, which accounts for 66 percent of the total time (as shown on Figure 2).
Paros organizacionales o externos (falta de material o personal, corte de servicios)Proporción del tiempo perdido66.0 %Un solo extractor
total leading time of syrup batching process
Ver cita textual (Section 2.2.2)
Total leading time of recently batching syrup process for new product is 140 minutes.
No clasificable a partir del reporteTiempo perdido140 minUn solo extractor
total leading time of syrup batching process
Ver cita textual (Section 3 / Figure 11)
The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11.
No clasificable a partir del reporteTiempo perdido98.0 minUn solo extractor
high fructose corn sugar transfer periodHFCS transfer pump
Ver cita textual (Section 2.3.1)
The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline).
Velocidad reducidaTiempo perdido35.0 minUn solo extractor
pump flow rate below design capacityHFCS transfer pump
Ver cita textual (Section 2.3.1)
The actual pump capacity just reach to 3.5-3.8 bar and the corresponding flow is 10.8 m3/h.
Velocidad reducidaCapacidad de producción10.8 m3/hUn solo extractor
pumping of sugar solution (HFCS transfer) after pump/pipeline renovationHFCS transfer pump
Ver cita textual (Section 3)
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
Velocidad reducidaTiempo perdido20.0 minUn solo extractor
pump and pipeline renovation (HFCS transfer time reduction)HFCS transfer pump
Ver cita textual (Section 3)
After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm (as shown on Figure 12), the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%).
Velocidad reducidaProporción del tiempo perdido10.7 %Un solo extractor
—HFCS transfer pump
Ver cita textual (Section 3)
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
noneCapacidad de producción18.9 m3/hUn solo extractor
—HFCS transfer pump
Ver cita textual (Section 3)
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
noneRazón de velocidad58.0 %Un solo extractor
quality check step (QC parameters: Brix, acidity, pH, appearance)
Ver cita textual (Section 2.3.3)
The total time for QC to complete the job is around 20 minutes.
No clasificable a partir del reporteTiempo perdido20.0 minUn solo extractor
quality check step after rearrangement
Ver cita textual (Section 3)
After rearranging the quality test for syrup output parameters, the time to complete batching and move to filling step is shortened to only 5 minutes.
No clasificable a partir del reporteTiempo perdido5.00 minUn solo extractor
Brix check station relocationBrix meter
Ver cita textual (Section 3)
The process is cut down 10-12 minutes of downtime (8.57%).
No clasificable a partir del reporteProporción del tiempo perdido8.57 %Un solo extractor
waiting time for syrup
Ver cita textual (Section 2.1 (Define phase), page 2)
The machine downtime is recognized as a critical problem of the waiting time for syrup, filler, packer, sleever, conveyor, which accounts for 66 percent of the total time (as shown on Figure 2).
Paros organizacionales o externos (falta de material o personal, corte de servicios)Proporción del tiempo planificado66.0 %Un solo extractor
—syrup batching tanks NCB-7 and NCB-8
Ver cita textual (Section 2.2.2 (Root Cause Analysis), page 6)
Total leading time of recently batching syrup process for new product is 140 minutes.
noneDuración media del evento140 minUn solo extractor
HFCS transfer and filtering through pump systemHFCS pump and pipeline, filtering system
Ver cita textual (Section 2.3.1, page 7)
The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline).
Paros organizacionales o externos (falta de material o personal, corte de servicios)Duración media del evento35.0 minUn solo extractor
quality check for Brix, acidity (TA), pH, appearanceQC department and measurement equipment
Ver cita textual (Section 2.3.3, page 8)
The total time for QC to complete the job is around 20 minutes.
Paros organizacionales o externos (falta de material o personal, corte de servicios)Duración media del evento20.0 minUn solo extractor
TA (titratable acidity) measurement and analysisTA measuring equipment, QC laboratory
Ver cita textual (Section 2.3.3, page 8)
the machine running time to measure TA is around 15 minutes. It shows that the measurement of TA takes long time, which leads to downtime
Paros organizacionales o externos (falta de material o personal, corte de servicios)Duración media del evento15.0 minUn solo extractor
—syrup batching tanks NCB-7 and NCB-8
Ver cita textual (Section 3 (Results), page 6)
The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11.
noneDuración media del evento98.0 minUn solo extractor
HFCS transfer and filtering after pump pressure and pipeline optimizationHFCS pump and pipeline system
Ver cita textual (Section 3 (Results), page 7)
After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm ... the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%).
noneDuración media del evento20.0 minUn solo extractor
quality check for Brix, pH, TA using correlation equation methodQC measurement equipment, Brix meter at mixing station
Ver cita textual (Section 3 (Results), page 9)
After rearranging the quality test for syrup output parameters, the time to complete batching and move to filling step is shortened to only 5 minutes. In addition, it ensures that the product quality meet the standards when the TA measurement step is taken place at the same time with the filling stage.
noneDuración media del evento5.00 minUn solo extractor

Unidades de observación

  • PET Hot Fill Line · Línea completa o equipo sin especificar · Línea base
  • Syrup batching process (overall) · Mezclado · Línea base
  • Syrup batching process (overall) · Mezclado · Después de la intervención
  • HFCS transfer pump · Mezclado · Línea base
  • HFCS transfer pump · Mezclado · Después de la intervención
  • Quality Control / Brix station · Inspección y control de peso · Línea base
  • Quality Control / Brix station · Inspección y control de peso · Después de la intervención
  • Lemon Tea hot fill line · Línea completa o equipo sin especificar · Línea base
  • Lemon Tea hot fill line · Línea completa o equipo sin especificar · Después de la intervención