Estudio incluido
Six Sigma application in an Irish meat processing plant to improve process yields
1Ficha bibliográfica
- Autores
- Rebecca Gilligan, Rachel Moran, Olivia McDermott
- Año
- 2023
- Publicación
- The TQM Journal
- País
- Ireland
- Segmento
- Carne, aves y pescado
- Familia de procesos
- Faena, corte y procesamiento primario
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · — máquinas
- Periodo de observación
- —
- Recolección de datos
- manual_logs
- Intervención
Ver el contexto tal como lo describe el estudio
The case study organisation where this research was undertaken was within the boning hall of a red meat processing plant based in Ireland.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 7Riesgo alto
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
Customer D non-conforming at LSLVer cita textual (Table 3)D | non-conforming at the lower specification limit at 84 and 88%, respectively | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 88.0 % | Ambos extractores coincidieron |
Customer C non-conforming at LSLVer cita textual (Table 3)C | non-conforming at the lower specification limit at 84 and 88%, respectively | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 84.0 % | Ambos extractores coincidieron |
Customer C non-conforming below LSLVer cita textual (Table 3)C | 100% non-conforming, where the results fell largely below the lower specification limit. No over-trimming | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 100 % | Ambos extractores coincidieron |
Customer C non-conforming, left skewed toward LSLVer cita textual (Table 3)C | 20% were non-conforming within the specifications left skewed of the target (i.e. the non-conforming longissimus dorsi were found towards the lower limit (LSL) | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 20.0 % | Ambos extractores coincidieron |
Customer E outside specificationVer cita textual (Table 3)E | 20% outside specifications | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 20.0 % | Ambos extractores coincidieron |
Customer A non-conforming at USLVer cita textual (Table 3)Outlier observed A customer specification – however, it was the most conforming specification, with only 16% non-conforming in the USL | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 16.0 % | Un solo extractor |
Customer A outliers non-conformingVer cita textual (Table 3)A | Outliers - 100% non-conforming with the specification requirements | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 100 % | Un solo extractor |
Customer E non-conforming, right skewed toward USLVer cita textual (Table 3)E | 20% were non-conforming within the specifications -Right skewed of the target (i.e. that non-conforming were found towards the upper specification limit (USL)) | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 20.0 % | Un solo extractor |
over-trimmingVer cita textual (Table 6, page 20)gluteus medius tails 7 0.35 0.79 | Defectos de proceso (desecho y reproceso) | Tiempo perdido | 0.350 kg | Un solo extractor |
over-trimmingVer cita textual (Table 6, page 20)longissimus dorsi tails 12 0.38 4.52 | Defectos de proceso (desecho y reproceso) | Tiempo perdido | 0.380 kg | Un solo extractor |
Unidades de observación
- gluteus medius tails · Corte, rebanado y deshuese · Línea base
- longissimus dorsi tails · Corte, rebanado y deshuese · Línea base
- longissimus dorsi backstrap · Corte, rebanado y deshuese · Línea base
- Boning Hall · Corte, rebanado y deshuese · Línea base

