Estudio incluido
Analisis Produktivitas Mesin Filling Botol Dengan Metode Overal Equipment Effectiveness Dan Failure Mode And Effect Analysis
1Ficha bibliográfica
- Autores
- Angga Prasetya Aji, Widya Setiafindari
- Año
- 2023
- Publicación
- Jurnal TRINISTIK Jurnal Teknik Industri Bisnis Digital dan Teknik Logistik
- País
- Indonesia
- Segmento
- Refrescos, agua embotellada y jugos
- Familia de procesos
- Línea de llenado y envasado
- Tipo de estudio
- Estudio de caso único
- Alcance de la extracción
- Solo resumen
- Tamaño
- 1 plantas · 1 líneas · 1 máquinas
- Periodo de observación
- 365 días
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
PDAM Tirta Binangun is located in Secang, Sendangsari, Pengasih, Kulon Progo. The problem faced by the company is that the production of 600 ml bottled drinking water has a product failure of 16,038 bottles in one year, from April 2021 to March 2022.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 8Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—filling machineVer cita textual (Abstract)The results of the OEE show that the average effectiveness of the filling machine is 87.48% so that the failure is still within tolerance and has a good value because it is greater than the OEE standard, which is 85%. | none | OEE | 87.5 % | Ambos extractores coincidieron |
Idle and Minor Stoppagefilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | Microparos y esperas | Proporción de eventos de pérdida | 15.9 % | Ambos extractores coincidieron |
Defect Lossesfilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | Defectos de proceso (desecho y reproceso) | Proporción de eventos de pérdida | 15.6 % | Ambos extractores coincidieron |
Downtime Lossesfilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | No clasificable a partir del reporte | Proporción de eventos de pérdida | 28.3 % | Adjudicado |
Reduce Speed Lossesfilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | Velocidad reducida | Proporción de eventos de pérdida | 39.0 % | Ambos extractores coincidieron |
Reduce Speed Lossesfilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | Velocidad reducida | Proporción del tiempo planificado | 3.82 % | Un solo extractor |
Downtime Lossesfilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | No clasificable a partir del reporte | Proporción del tiempo planificado | 2.27 % | Un solo extractor |
Defect Lossesfilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | Defectos de proceso (desecho y reproceso) | Proporción del tiempo planificado | 1.58 % | Un solo extractor |
Idle and Minor Stoppagefilling machineVer cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%. | Microparos y esperas | Proporción del tiempo planificado | 1.55 % | Un solo extractor |
—Ver cita textual (Abstract)Reduce Speed Losses with an average proportion of 3.82% | Velocidad reducida | Proporción del tiempo perdido | 3.82 % | Un solo extractor |
—Ver cita textual (Abstract)Downtime Losses with an average of 2.27% | Fallas de equipo (averías) | Proporción del tiempo perdido | 2.27 % | Un solo extractor |
—Ver cita textual (Abstract)Defect Losses with an average of 1.58% | Defectos de proceso (desecho y reproceso) | Proporción del tiempo perdido | 1.58 % | Un solo extractor |
—Ver cita textual (Abstract)Idle and Minor Stoppage with an average of 1.55% | Microparos y esperas | Proporción del tiempo perdido | 1.55 % | Un solo extractor |
—Ver cita textual (Abstract)the production of 600 ml bottled drinking water has a product failure of 16,038 bottles in one year, from April 2021 to March 2022 | Defectos de proceso (desecho y reproceso) | Número de eventos | 16,038 bottles | Un solo extractor |
Unidades de observación
- Filling machine · Llenado · Línea base

