Estudio incluido
A SEMINAR PAPER ON “OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY AT A BOTTLING PLANT”
1Ficha bibliográfica
- Autores
- Khem Raj Pokhrel
- Año
- 2023
- Publicación
- International Journal of Engineering Applied Sciences and Technology
- País
- Nepal
- Segmento
- Refrescos, agua embotellada y jugos
- Familia de procesos
- Línea de llenado y envasado
- Tipo de estudio
- Estudio de caso único
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · 1 máquinas
- Periodo de observación
- 10 días
- Recolección de datos
- manual_logs
- Intervención
Ver el contexto tal como lo describe el estudio
a case study on a production line of VBNPL, one of the reputed beverage companies in Nepal working as the franchise of the international brand “PepsiCo. Int”, is done.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—FillerVer cita textual (Section V.B Discussion)Since only 97.97% of the quality rate is obtained from the calculation. | none | Calidad | 98.0 % | Ambos extractores coincidieron |
—FillerVer cita textual (Section VI Conclusion)the OEE of the filler section is computed which is obtained as 61.8% which is comparatively less. | none | OEE | 61.8 % | Ambos extractores coincidieron |
Bottle obstruted on spiral drivespiral driveVer cita textual (Table-7)7 Bottle obstruted on spiral drive 2 61 100% | Microparos y esperas | Número de eventos | 2.00 events | Ambos extractores coincidieron |
Crown path obstructedcrownerVer cita textual (Table-7)5 Crown path obstructed 3 57 93% | Microparos y esperas | Número de eventos | 3.00 events | Ambos extractores coincidieron |
Bottle shortageVer cita textual (Table-7)4 Bottle shortage 5 54 89% | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Número de eventos | 5.00 events | Ambos extractores coincidieron |
Bottle fallingconveyorVer cita textual (Table-7)1 Bottle falling 21 21 34% | Microparos y esperas | Número de eventos | 21.0 events | Ambos extractores coincidieron |
Looses vent tubevent tubeVer cita textual (Table-7)2 Looses vent tube 16 37 61% | Fallas de equipo (averías) | Número de eventos | 16.0 events | Ambos extractores coincidieron |
Bottle jamconveyorVer cita textual (Table-7)6 Bottle jam 2 59 97% | Microparos y esperas | Número de eventos | 2.00 events | Ambos extractores coincidieron |
Reject BottlesFillerVer cita textual (Table-6)105334 2134 8 1.5 0.62 385 | Defectos de proceso (desecho y reproceso) | Número de eventos | 2,134 bottles | Un solo extractor |
—FillerVer cita textual (Table-6)105334 2134 8 1.5 0.62 385 | Paro planificado (mantenimiento programado, descansos, sin demanda) | Tiempo perdido | 1.50 hrs | Un solo extractor |
—FillerVer cita textual (Table-6)105334 2134 8 1.5 0.62 385 | Fallas de equipo (averías) | Tiempo perdido | 0.620 hrs | Un solo extractor |
Reject BottlesFillerVer cita textual (Table-6)88883 2483 8 2 0.83 385 | Defectos de proceso (desecho y reproceso) | Número de eventos | 2,483 bottles | Un solo extractor |
—FillerVer cita textual (Table-6)88883 2483 8 2 0.83 385 | Paro planificado (mantenimiento programado, descansos, sin demanda) | Tiempo perdido | 2.00 hrs | Un solo extractor |
—FillerVer cita textual (Table-6)88883 2483 8 2 0.83 385 | Fallas de equipo (averías) | Tiempo perdido | 0.830 hrs | Un solo extractor |
Reject BottlesFillerVer cita textual (Table-6)93559 2359 8 0.75 0.75 385 | Defectos de proceso (desecho y reproceso) | Número de eventos | 2,359 bottles | Un solo extractor |
—FillerVer cita textual (Table-6)93559 2359 8 0.75 0.75 385 | Paro planificado (mantenimiento programado, descansos, sin demanda) | Tiempo perdido | 0.750 hrs | Un solo extractor |
—FillerVer cita textual (Table-6)93559 2359 8 0.75 0.75 385 | Fallas de equipo (averías) | Tiempo perdido | 0.750 hrs | Un solo extractor |
Unidades de observación
- Filler · Llenado · Línea base

