Estudio incluido
Losses analysis of nuggets production on the forming line machine at PT XYZ
1Ficha bibliográfica
- Autores
- Nita Kuswardhani, Bambang Herry Purnomo, Nanda Sintya Fitri Salsabila
- Año
- 2024
- Publicación
- AIP conference proceedings
- País
- —
- Segmento
- Carne, aves y pescado
- Familia de procesos
- Formado, horneado y cocción
- Tipo de estudio
- Estudio de caso único
- Alcance de la extracción
- Solo resumen
- Tamaño
- 1 plantas · 1 líneas · 1 máquinas
- Periodo de observación
- 365 días
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
The nugget production process in the forming line uses a semi automation machine that runs continuously.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 8Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
reduced speed lossesforming line machineVer cita textual (Abstract)the three biggest factors that caused the low value of machine effectiveness were idling & minor stoppages losses of 24.61%, yield losses of 24.37%, and reduced speed losses of 23.78% | Velocidad reducida | Proporción del tiempo perdido | 23.8 % | Ambos extractores coincidieron |
yield lossesforming line machineVer cita textual (Abstract)the three biggest factors that caused the low value of machine effectiveness were idling & minor stoppages losses of 24.61%, yield losses of 24.37%, and reduced speed losses of 23.78% | Pérdidas de arranque (rendimiento reducido) | Proporción del tiempo perdido | 24.4 % | Ambos extractores coincidieron |
idling & minor stoppages lossesforming line machineVer cita textual (Abstract)the three biggest factors that caused the low value of machine effectiveness were idling & minor stoppages losses of 24.61%, yield losses of 24.37%, and reduced speed losses of 23.78% | Microparos y esperas | Proporción del tiempo perdido | 24.6 % | Ambos extractores coincidieron |
Unidades de observación
- Forming line · Formado, moldeado y dosificado · Línea base

