Estudio incluido
Optimizing Beverage Manufacturing: Integrating Lean Manufacturing and Machine Learning to Enhance Efficiency and Reduce Waste
1Ficha bibliográfica
- Autores
- Raul Mendoza-Sotomayor, Jose Antonio Sabogal-Arias, Juan Carlos Quiroz-Flores
- Año
- 2024
- Publicación
- International Journal of Engineering Trends and Technology
- País
- Peru
- Segmento
- Cerveza, vino y destilados
- Familia de procesos
- Línea de llenado y envasado
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · 5 máquinas
- Periodo de observación
- —
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
As observed in Figure 4, the company lacks an adequate demand forecast and experiences high changeover time and a high percentage of defects during the labeling process.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 6Riesgo alto
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—mixing machineVer cita textual (Fig. 4 VSM of the company)TC= 315 SEC TCP= 30 MIN TF= 100% PNC= 8% TD= 25200 SEC/DAY | Setups y ajustes | Tiempo perdido | 30.0 min | Un solo extractor |
—mixing machineVer cita textual (Fig. 4 VSM of the company)TC= 315 SEC TCP= 30 MIN TF= 100% PNC= 8% TD= 25200 SEC/DAY | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 8.00 % | Un solo extractor |
—mixing machineVer cita textual (Fig. 4 VSM of the company)TC= 315 SEC TCP= 30 MIN TF= 100% PNC= 8% TD= 25200 SEC/DAY | none | Disponibilidad | 100 % | Un solo extractor |
—filling machineVer cita textual (Fig. 4 VSM of the company)TC= 293 SEC TCP= 10 MIN TF= 75% PNC= 12% TD= 25200 SEC/DAY | Setups y ajustes | Tiempo perdido | 10.0 min | Un solo extractor |
—filling machineVer cita textual (Fig. 4 VSM of the company)TC= 293 SEC TCP= 10 MIN TF= 75% PNC= 12% TD= 25200 SEC/DAY | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 12.0 % | Un solo extractor |
—filling machineVer cita textual (Fig. 4 VSM of the company)TC= 293 SEC TCP= 10 MIN TF= 75% PNC= 12% TD= 25200 SEC/DAY | none | Disponibilidad | 75.0 % | Un solo extractor |
—capping machineVer cita textual (Fig. 4 VSM of the company)TC= 376 SEC TCP= 10 MIN TF= 90% PNC= 15% TD= 25200 SEC/DAY | Setups y ajustes | Tiempo perdido | 10.0 min | Un solo extractor |
—capping machineVer cita textual (Fig. 4 VSM of the company)TC= 376 SEC TCP= 10 MIN TF= 90% PNC= 15% TD= 25200 SEC/DAY | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 15.0 % | Un solo extractor |
—capping machineVer cita textual (Fig. 4 VSM of the company)TC= 376 SEC TCP= 10 MIN TF= 90% PNC= 15% TD= 25200 SEC/DAY | none | Disponibilidad | 90.0 % | Un solo extractor |
improperly sealed bottlescapping machineVer cita textual (Section 5.1 Value Stream Mapping)The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 18.0 % | Un solo extractor |
—labeling machineVer cita textual (Fig. 4 VSM of the company)TC= 336 SEC TCP= 10 MIN TF= 80% PNC= 20% TD= 25200 SEC/DAY | Setups y ajustes | Tiempo perdido | 10.0 min | Un solo extractor |
—labeling machineVer cita textual (Fig. 4 VSM of the company)TC= 336 SEC TCP= 10 MIN TF= 80% PNC= 20% TD= 25200 SEC/DAY | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 20.0 % | Un solo extractor |
—labeling machineVer cita textual (Fig. 4 VSM of the company)TC= 336 SEC TCP= 10 MIN TF= 80% PNC= 20% TD= 25200 SEC/DAY | none | Disponibilidad | 80.0 % | Un solo extractor |
incorrectly labeled bottleslabeling machineVer cita textual (Section 5.1 Value Stream Mapping)The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 25.0 % | Un solo extractor |
—packing machineVer cita textual (Fig. 4 VSM of the company)TC= 420 SEC TCP= 1 MIN TF= 100% PNC= 0% TD= 25200 SEC/DAY | Setups y ajustes | Tiempo perdido | 1.00 min | Un solo extractor |
—packing machineVer cita textual (Fig. 4 VSM of the company)TC= 420 SEC TCP= 1 MIN TF= 100% PNC= 0% TD= 25200 SEC/DAY | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 0 % | Un solo extractor |
—packing machineVer cita textual (Fig. 4 VSM of the company)TC= 420 SEC TCP= 1 MIN TF= 100% PNC= 0% TD= 25200 SEC/DAY | none | Disponibilidad | 100 % | Un solo extractor |
reprocessingVer cita textual (Section 5.1 Value Stream Mapping)The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 12.0 % | Un solo extractor |
Unidades de observación
- Mixing station · Mezclado · Línea base
- Filling · Llenado · Línea base
- Capping · Tapado y cerrado · Línea base
- Labeling · Etiquetado y codificado · Línea base
- Packing · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
- Whole production line · Línea completa o equipo sin especificar · Línea base

