Estudio incluido
Integrating Lean Manufacturing and TPM for Process Optimization in Bakery SMEs: A Case Study from Peru
1Ficha bibliográfica
- Autores
- Roger Alberto Vásquez-García, Rubén Francisco Samanez-Coronel
- Año
- 2024
- Publicación
- International Conference on Industrial Engineering and Operations Management (IEOM)
- País
- Peru
- Segmento
- Panadería y pastas
- Familia de procesos
- Formado, horneado y cocción
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · — líneas · — máquinas
- Periodo de observación
- 120 días
- Recolección de datos
- maintenance_records
- Intervención
Ver el contexto tal como lo describe el estudio
The validation scenario took place in a case study involving a bakery SME located in Peru, which specialized in producing various pastries and desserts, including cakes and soufflés.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 7Riesgo alto
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—ovens and mixing machinesVer cita textual (Section 4.4)The MTBF (mean time between failures) increased from 24.33 hours to 61.33 hours, representing a 150% improvement in equipment reliability. | Fallas de equipo (averías) | Tiempo entre eventos | 61.3 hours | Ambos extractores coincidieron |
—ovens and mixing machinesVer cita textual (Section 4.4)The MTTR (mean time to repair) improved from 5.10 hours in September to 3.33 hours by December, a 35% reduction. | Fallas de equipo (averías) | Duración media del evento | 3.33 hours | Ambos extractores coincidieron |
cakes that were overbaked or underbaked due to oven temperature fluctuationsovensVer cita textual (Section 4.4)Before maintenance training, the number of defective products, particularly cakes that were overbaked or underbaked due to oven temperature fluctuations, averaged 30 units per month. | Defectos de proceso (desecho y reproceso) | Número de eventos | 30.0 units/month | Ambos extractores coincidieron |
defective cakes due to improper proceduresVer cita textual (Section 4.5)The percentage of defective cakes due to improper procedures dropped from 9.52% to 3.85%, a reduction of over 60%. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 3.85 % | Ambos extractores coincidieron |
defective cakes due to improper proceduresVer cita textual (Section 4.5)The percentage of defective cakes due to improper procedures dropped from 9.52% to 3.85%, a reduction of over 60%. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 9.52 % | Ambos extractores coincidieron |
cakes that were overbaked or underbaked due to oven temperature fluctuationsovensVer cita textual (Section 4.4)This number dropped to 12 units per month after the operators were trained to monitor and maintain the ovens more effectively. | Defectos de proceso (desecho y reproceso) | Número de eventos | 12.0 units/month | Ambos extractores coincidieron |
—ovens and mixing machinesVer cita textual (Section 4.4)Prior to implementation, the bakery experienced an average of 101.15 minutes of machine downtime per week, resulting in the loss of 17 products per month. | Fallas de equipo (averías) | Tiempo perdido | 101 min/week | Ambos extractores coincidieron |
—ovens and mixing machinesVer cita textual (Section 4.4)The MTTR (mean time to repair) improved from 5.10 hours in September to 3.33 hours by December, a 35% reduction. | Fallas de equipo (averías) | Duración media del evento | 5.10 hours | Un solo extractor |
—ovens and mixing machinesVer cita textual (Table 1)MTTR hours 4.27 3.5 3.33 -22.01% | Fallas de equipo (averías) | Duración media del evento | 4.27 hours | Un solo extractor |
—ovens and mixing machinesVer cita textual (Section 4.4)The MTBF (mean time between failures) increased from 24.33 hours to 61.33 hours, representing a 150% improvement in equipment reliability. | Fallas de equipo (averías) | Tiempo entre eventos | 24.3 hours | Un solo extractor |
—Ver cita textual (Table 1)Rate of reprocessed products % 23% 10% 13% -43.48% | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 23.0 % | Un solo extractor |
—Ver cita textual (Table 1)Rate of reprocessed products % 23% 10% 13% -43.48% | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 13.0 % | Un solo extractor |
—Ver cita textual (Table 1, Results section, page 10-11)the rate of order fulfillment improved significantly, rising from 77.81% to 91.23% | none | Proporción del tiempo planificado | 77.8 % | Un solo extractor |
searching for production tools and materialsVer cita textual (Section 4.3, page 11)the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Tiempo perdido | 77.0 minutes | Un solo extractor |
oven overheating/shutdown, mixing machine blockagesovens, mixing machinesVer cita textual (Section 4.4, page 9)an average of 101.15 minutes of machine downtime per week, resulting in the loss of 17 products per month | Fallas de equipo (averías) | Número de eventos | 17.0 units | Un solo extractor |
—Ver cita textual (Table 1, Results section, page 10-11)the rate of order fulfillment improved significantly, rising from 77.81% to 91.23% | none | Proporción del tiempo planificado | 91.2 % | Un solo extractor |
searching for production tools and materials - after 5S implementationVer cita textual (Section 4.3, page 11)the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Tiempo perdido | 29.0 minutes | Un solo extractor |
oven overheating/shutdown, mixing machine blockages - after autonomous maintenance trainingovens, mixing machinesVer cita textual (Section 4.4, page 9)reducing monthly product losses from 17 to 5 | Fallas de equipo (averías) | Número de eventos | 5.00 units | Un solo extractor |
Unidades de observación
- Bakery SME - whole plant · Línea completa o equipo sin especificar · Después de la intervención
- Bakery SME - whole plant · Línea completa o equipo sin especificar · Línea base
- Bakery SME (Peru) · Línea completa o equipo sin especificar · Línea base
- Bakery SME (Peru) · Línea completa o equipo sin especificar · Después de la intervención

