foratvise
Comenzar
Estudio incluido

Industrial Food Process Improvement by Waste Minimization in Pasta Packaging Using DMAIC Methodology

Abrir fuente

1Ficha bibliográfica

Autores
Svetlana Dabić-Miletić
Año
2025
Publicación
Journal of Industrial Intelligence
País
—
Segmento
Panadería y pastas
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 5 líneas · — máquinas
Periodo de observación
7 días
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
In a pasta production facility, a significant issue was identified during the packaging stage related to excessive raw packaging material usage due to overfilling.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 6Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
overfilling; package weight exceeds tolerance specification
Ver cita textual (Section 5.1, Measurement (Measure phase))
the average weight per package is 512 g, with a standard deviation of 8 g, which significantly exceeds the allowed tolerance of ±5 g
Defectos de proceso (desecho y reproceso)Calidad512 gUn solo extractor
high weight variation in packages
Ver cita textual (Section 5.1, Measurement (Measure phase))
the average weight per package is 512 g, with a standard deviation of 8 g
Defectos de proceso (desecho y reproceso)Calidad8.00 gUn solo extractor
overfilling; package weight exceeds tolerance specification (reduced)
Ver cita textual (Section 5.1, Improvement (Improve phase))
the average weight per package was reduced to 499 g, with a standard deviation of 3 g
Defectos de proceso (desecho y reproceso)Calidad499 gUn solo extractor
high weight variation in packages (reduced)
Ver cita textual (Section 5.1, Improvement (Improve phase))
the average weight per package was reduced to 499 g, with a standard deviation of 3 g
Defectos de proceso (desecho y reproceso)Calidad3.00 gUn solo extractor
raw material waste from overfilling
Ver cita textual (Section 5.1, Improvement (Improve phase))
Raw material waste was reduced by 27%, which led to savings of EUR 4,200 per month.
Defectos de proceso (desecho y reproceso)Tasa de defectos27.0 %Un solo extractor

Unidades de observación

  • Packaging lines 1-5 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Packaging lines 1-5 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención