Estudio incluido
Implementing Lean and TPM for Machine Availability Enhancement: A Case Study in the Peruvian Food Processing Industry
1Ficha bibliográfica
- Autores
- Luis Mauricio Mariluz-Cuadros, Brandon Minaya-Sanchez, Alberto Flores-Pérez
- Año
- 2025
- Publicación
- International Conference on Industrial Engineering and Operations Management (IEOM)
- País
- Peru
- Segmento
- Alimento animal y para mascotas
- Familia de procesos
- Molienda, extracción y separación
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · — máquinas
- Periodo de observación
- —
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
The validation scenario was conducted in a case study of an agricultural production company specializing in the manufacturing of protein flours derived from animal by-products through the process known as rendering.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 7Riesgo alto
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—milling machineVer cita textual (Section 4.3 Autonomous Maintenance)Similarly, the mean time between failures (MTBF) increased from 27.27 hours to 39.30 hours, indicating a substantial enhancement in equipment reliability. | Fallas de equipo (averías) | Tiempo entre eventos | 39.3 hours | Adjudicado |
—milling machineVer cita textual (Section 4.3 Autonomous Maintenance)The mean time to repair (MTTR) was reduced from 2.36 hours to 1.84 hours, reflecting a 43.96% improvement. | Fallas de equipo (averías) | Duración media del evento | 1.84 hours | Adjudicado |
—milling machineVer cita textual (Section 4.3 Autonomous Maintenance)Similarly, the mean time between failures (MTBF) increased from 27.27 hours to 39.30 hours, indicating a substantial enhancement in equipment reliability. | Fallas de equipo (averías) | Tiempo entre eventos | 27.3 hours | Adjudicado |
—milling machineVer cita textual (Section 4.3 Autonomous Maintenance)The mean time to repair (MTTR) was reduced from 2.36 hours to 1.84 hours, reflecting a 43.96% improvement. | Fallas de equipo (averías) | Duración media del evento | 2.36 hours | Adjudicado |
—milling machineVer cita textual (Table 1)Availability Rate % 77.01% 90% 82.00% 6.48% | none | Disponibilidad | 82.0 % | Ambos extractores coincidieron |
—milling machineVer cita textual (Table 1)Availability Rate % 77.01% 90% 82.00% 6.48% | none | Disponibilidad | 77.0 % | Ambos extractores coincidieron |
setup time (total)milling machineVer cita textual (Table 1)Time to set up minute 303.54 195 210.02 -30.81% | Setups y ajustes | Tiempo perdido | 210 minute | Ambos extractores coincidieron |
setup time (total)milling machineVer cita textual (Table 1)Time to set up minute 303.54 195 210.02 -30.81% | Setups y ajustes | Tiempo perdido | 304 minute | Ambos extractores coincidieron |
faultsmilling machineVer cita textual (Table 1)Number of faults times 243 120 175 -27.98% | Fallas de equipo (averías) | Número de eventos | 175 times | Ambos extractores coincidieron |
faultsmilling machineVer cita textual (Table 1)Number of faults times 243 120 175 -27.98% | Fallas de equipo (averías) | Número de eventos | 243 times | Ambos extractores coincidieron |
—milling machineVer cita textual (Table 1)MTTR (Average repair time) minute 2.36 1.5 1.84 -22.03% | none | Duración media del evento | 2.36 minute | Un solo extractor |
—milling machineVer cita textual (Table 1)MTBF (Mean time between failures) minute 27.23 45 39.3 44.33% | none | Tiempo entre eventos | 27.2 minute | Un solo extractor |
setup time (total)milling machineVer cita textual (Section 4.3 SMED)As a result, the total setup time decreased from 301.28 minutes to 210.02 minutes, representing a 30.81% improvement. | Setups y ajustes | Tiempo perdido | 301 minutes | Un solo extractor |
internal setup activitiesmilling machineVer cita textual (Section 4.3 SMED / Figure 4)The total time for internal activities was reduced from 301.28 minutes to 225.21 minutes, representing a 25.63% reduction in downtime, while external tasks remained stable or were improved slightly. | Setups y ajustes | Tiempo perdido | 301 minutes | Un solo extractor |
high unproductive timesmilling machineVer cita textual (Section 4.2 / Figure 2)At Level 1 of the analysis, the primary causes were identified as high unproductive times (75%) and frequent operator failures (25%). | No clasificable a partir del reporte | Proporción del tiempo perdido | 75.0 % | Un solo extractor |
frequent operator failuresmilling machineVer cita textual (Section 4.2 / Figure 2)At Level 1 of the analysis, the primary causes were identified as high unproductive times (75%) and frequent operator failures (25%). | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Proporción del tiempo perdido | 25.0 % | Un solo extractor |
high machine shutdowns due to failuremilling machineVer cita textual (Section 4.2)At Level 2, the root causes of unproductive times were mainly attributed to high machine shutdowns due to failure (45.98%) and frequent setup stops (29.02%). | Fallas de equipo (averías) | Proporción del tiempo perdido | 46.0 % | Un solo extractor |
frequent setup stopsmilling machineVer cita textual (Section 4.2)At Level 2, the root causes of unproductive times were mainly attributed to high machine shutdowns due to failure (45.98%) and frequent setup stops (29.02%). | Setups y ajustes | Proporción del tiempo perdido | 29.0 % | Un solo extractor |
lack of order and cleanliness in the facilitymilling machineVer cita textual (Section 4.2)On the other hand, operator failures were linked to a lack of order and cleanliness in the facility (21%). | Paros organizacionales o externos (falta de material o personal, corte de servicios) | Proporción del tiempo perdido | 21.0 % | Un solo extractor |
—milling machineVer cita textual (Table 1)MTTR (Average repair time) minute 2.36 1.5 1.84 -22.03% | none | Duración media del evento | 1.84 minute | Un solo extractor |
—milling machineVer cita textual (Table 1)MTBF (Mean time between failures) minute 27.23 45 39.3 44.33% | none | Tiempo entre eventos | 39.3 minute | Un solo extractor |
internal setup activitiesmilling machineVer cita textual (Section 4.3 SMED / Figure 4)The total time for internal activities was reduced from 301.28 minutes to 225.21 minutes, representing a 25.63% reduction in downtime, while external tasks remained stable or were improved slightly. | Setups y ajustes | Tiempo perdido | 225 minutes | Un solo extractor |
Unidades de observación
- Milling machines · Molienda · Después de la intervención
- Milling machines · Molienda · Línea base

