Estudio incluido
Technical Analysis and Solutions to Reduce Scrap Rate In Liquid Filler Machine: Case Study: In Moha Soft Drink Production Line
1Ficha bibliográfica
- Autores
- Samuel Berhe Gebremedhin, Goytom Desta Gebreyesus, Misgna Arefaine Gebreabzgi
- Año
- 2025
- Publicación
- Research Square
- País
- Ethiopia
- Segmento
- Refrescos, agua embotellada y jugos
- Familia de procesos
- Línea de llenado y envasado
- Tipo de estudio
- Estudio de caso único
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · 1 máquinas
- Periodo de observación
- 120 días
- Recolección de datos
- manual_logs
- Intervención
Ver el contexto tal como lo describe el estudio
This study focuses on the filler machine at the Moha Soft Drink Factory in Mekelle, where scrap accounts for approximately 3.85% of production, thereby reducing profitability.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 11Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—Filler machineVer cita textual (Section 1 Introduction)The company targets a production yield of 98.5%, yet actual operations show an average monthly scrap rate of about 3.85%. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 3.85 % | Ambos extractores coincidieron |
Out of spaceVer cita textual (Section 4.1 / Table 2)Full breakage and out-of-space defects were less common, contributing 4,518 and 1,296 cases, respectively, across the study period. | Defectos de proceso (desecho y reproceso) | Número de eventos | 1,296 cases | Ambos extractores coincidieron |
Full breakageVer cita textual (Section 4.1 / Table 2)Full breakage and out-of-space defects were less common, contributing 4,518 and 1,296 cases, respectively, across the study period. | Defectos de proceso (desecho y reproceso) | Número de eventos | 4,518 cases | Ambos extractores coincidieron |
ContaminatedVer cita textual (Section 4.1 / Table 2)Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases. | Defectos de proceso (desecho y reproceso) | Número de eventos | 8,124 cases | Ambos extractores coincidieron |
UncrownedCrowner (crowning system)Ver cita textual (Section 4.1 / Table 2)Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases. | Defectos de proceso (desecho y reproceso) | Número de eventos | 14,508 cases | Ambos extractores coincidieron |
Under fillFiller machine (filling valve, piston)Ver cita textual (Section 4.1 / Table 2)Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases. | Defectos de proceso (desecho y reproceso) | Número de eventos | 20,598 cases | Ambos extractores coincidieron |
Total scrapVer cita textual (Table 2)Total | 20598 | 14508 | 8124 | 4518 | 1296 | 49044 | No clasificable a partir del reporte | Número de eventos | 49,044 cases | Un solo extractor |
—Ver cita textual (Section 4.1)Underfill, uncrowned, and contamination together accounted for 88.1% of all scrap, confirming that these are the most critical defects in the production line. | No clasificable a partir del reporte | Proporción de eventos de pérdida | 88.1 % | Un solo extractor |
underfill, uncrowned bottles, and contaminationVer cita textual (Abstract and Section 4.1)Pareto analysis revealed underfilling, uncrowned bottles, and contamination as the top contributors to scrap, accounting for 88.1% of total rejects. | Defectos de proceso (desecho y reproceso) | Proporción de eventos de pérdida | 88.1 % | Un solo extractor |
Unidades de observación
- Filler machine - Moha Soft Drink Factory · Llenado · Línea base
- Liquid Filler Machine · Llenado · Línea base

