foratvise
Comenzar
Estudio incluido

Proposal to Enhance Productivity by Applying Lean Manufacturing Tools in a Fish Canning Company

Abrir fuente

1Ficha bibliográfica

Autores
Flavia Espinoza-Montero, Rodrigo R. Quintanilla-Chalan, Jorge Antonio Corzo-Chávez, Gino Viacava-Campos
Año
2026
Publicación
Congreso Internacional de Ingeniería Industrial de la Universidad de Lima
País
Peru
Segmento
Carne, aves y pescado
Familia de procesos
Faena, corte y procesamiento primario
Tipo de estudio
Simulación (solo datos de entrada)
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · 2 máquinas
Periodo de observación
30 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
the studied company is a medium-sized fish canning processor operating two 8-hour shifts with an installed capacity of 180 tons per shift.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 9Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
Overheating due to filter cloggingAutoclave
Ver cita textual (Table III)
Overheating due to filter clogging 4 30 2.1
Fallas de equipo (averías)Número de eventos4.00 occurrences/monthAmbos extractores coincidieron
Control instrument misalignmentAutoclave
Ver cita textual (Table III)
Control instrument misalignment 5 40 3.2
Fallas de equipo (averías)Número de eventos5.00 occurrences/monthAmbos extractores coincidieron
Sealing mechanism malfunctionAutoclave
Ver cita textual (Table III)
Sealing mechanism malfunction 9 28 3.8
Fallas de equipo (averías)Número de eventos9.00 occurrences/monthAmbos extractores coincidieron
Pressure calibration failureAutoclave
Ver cita textual (Table III)
Pressure calibration failure 12 35 4.5
Fallas de equipo (averías)Número de eventos12.0 occurrences/monthAmbos extractores coincidieron
Gasket wear and replacementAutoclave
Ver cita textual (Table III)
Gasket wear and replacement 7 22 2.7
Fallas de equipo (averías)Número de eventos7.00 occurrences/monthAmbos extractores coincidieron
—
Ver cita textual (Table IV)
Defect rate 13% 4.3%
Defectos de proceso (desecho y reproceso)Tasa de defectos13.0 %Adjudicado
Overheating due to filter cloggingAutoclave
Ver cita textual (Table III)
Overheating due to filter clogging 4 30 2.1
Fallas de equipo (averías)Proporción del tiempo planificado2.10 %Ambos extractores coincidieron
Overheating due to filter cloggingAutoclave
Ver cita textual (Table III)
Overheating due to filter clogging 4 30 2.1
Fallas de equipo (averías)Duración media del evento30.0 minAmbos extractores coincidieron
—
Ver cita textual (Abstract)
Labor productivity increased from 6 to 7 units/h
noneCapacidad de producción6.00 units/hAmbos extractores coincidieron
Control instrument misalignmentAutoclave
Ver cita textual (Table III)
Control instrument misalignment 5 40 3.2
Fallas de equipo (averías)Proporción del tiempo planificado3.20 %Ambos extractores coincidieron
Control instrument misalignmentAutoclave
Ver cita textual (Table III)
Control instrument misalignment 5 40 3.2
Fallas de equipo (averías)Duración media del evento40.0 minAmbos extractores coincidieron
Sealing mechanism malfunctionAutoclave
Ver cita textual (Table III)
Sealing mechanism malfunction 9 28 3.8
Fallas de equipo (averías)Proporción del tiempo planificado3.80 %Ambos extractores coincidieron
Sealing mechanism malfunctionAutoclave
Ver cita textual (Table III)
Sealing mechanism malfunction 9 28 3.8
Fallas de equipo (averías)Duración media del evento28.0 minAmbos extractores coincidieron
Pressure calibration failureAutoclave
Ver cita textual (Table III)
Pressure calibration failure 12 35 4.5
Fallas de equipo (averías)Proporción del tiempo planificado4.50 %Ambos extractores coincidieron
Pressure calibration failureAutoclave
Ver cita textual (Table III)
Pressure calibration failure 12 35 4.5
Fallas de equipo (averías)Duración media del evento35.0 minAmbos extractores coincidieron
Gasket wear and replacementAutoclave
Ver cita textual (Table III)
Gasket wear and replacement 7 22 2.7
Fallas de equipo (averías)Proporción del tiempo planificado2.70 %Ambos extractores coincidieron
Gasket wear and replacementAutoclave
Ver cita textual (Table III)
Gasket wear and replacement 7 22 2.7
Fallas de equipo (averías)Duración media del evento22.0 minAmbos extractores coincidieron
—
Ver cita textual (Section III Results, Fig. 10)
the OEE indicator initially stood at 63.2%, with a target of 85%.
noneOEE63.2 %Ambos extractores coincidieron
Calibration verificationSealing machine
Ver cita textual (Table I)
Calibration verification 85 min X
Setups y ajustesTiempo perdido85.0 minUn solo extractor
Daily cleaning of sealing headsSealing machine
Ver cita textual (Table I)
Daily cleaning of sealing heads 65 s X
Setups y ajustesTiempo perdido65.0 sUn solo extractor
Pressure adjustmentSealing machine
Ver cita textual (Table I)
Pressure adjustment 60 s X
Setups y ajustesTiempo perdido60.0 sUn solo extractor
Seal replacementSealing machine
Ver cita textual (Table I)
Seal replacement 85 s X
Setups y ajustesTiempo perdido85.0 sUn solo extractor
Inspection of worn partsSealing machine
Ver cita textual (Table I)
Inspection of worn parts 60 s X
Setups y ajustesTiempo perdido60.0 sUn solo extractor
Roller inspectionSealing machine
Ver cita textual (Table I)
Roller inspection 70 s X
Setups y ajustesTiempo perdido70.0 sUn solo extractor
Sealing mechanism adjustmentSealing machine
Ver cita textual (Table I)
Sealing mechanism adjust- ment 90 s X
Setups y ajustesTiempo perdido90.0 sUn solo extractor
Inspection and lubrication of moving partsSealing machine
Ver cita textual (Table I)
Inspection and lubrication of moving parts 80 s X
Setups y ajustesTiempo perdido80.0 sUn solo extractor
General equipment cleaningSealing machine
Ver cita textual (Table I)
General equipment cleaning 120 s X
Setups y ajustesTiempo perdido120 sUn solo extractor
Gasket replacementSealing machine
Ver cita textual (Table I)
Gasket replacement 80 s X
Setups y ajustesTiempo perdido80.0 sUn solo extractor
—Autoclave
Ver cita textual (Section IV Discussion)
MTBF improved from 3.2 to 6.8 h, and MTTR decreased from 28 to 15 min, confirming increased equipment reliability and faster recovery.
Fallas de equipo (averías)Tiempo entre eventos3.20 hUn solo extractor
—Autoclave
Ver cita textual (Section IV Discussion)
MTBF improved from 3.2 to 6.8 h, and MTTR decreased from 28 to 15 min, confirming increased equipment reliability and faster recovery.
Fallas de equipo (averías)Duración media del evento28.0 minUn solo extractor
—
Ver cita textual (Section IV Discussion)
The availability rate increased from 70.4% to 85.2%, closing 91.7% of the performance gap toward the 90% target.
noneDisponibilidad70.4 %Un solo extractor
equipment failure rate
Ver cita textual (Abstract)
equipment failure rates declined from 13.67% to 4.59%
Fallas de equipo (averías)Proporción del tiempo perdido13.7 %Un solo extractor
—Sealing machine
Ver cita textual (Results section, page 58)
the setup time of the sealing machine was reduced from 12.9 to 5.3 min
Setups y ajustesTiempo perdido12.9 minUn solo extractor

Unidades de observación

  • Autoclave · Esterilización (autoclave, UHT) · Línea base
  • Whole plant · Línea completa o equipo sin especificar · Línea base
  • Sealing machine · Tapado y cerrado · Línea base