foratvise
Comenzar
Estudio incluido

Optimizing Side Guard Angles on Multi-to-Single Conveyors to Minimize Infeed Stuck and Increase Overall Equipment Effectiveness

Abrir fuente

1Ficha bibliográfica

Autores
Lusianawati, Muchamad Malik, Wardatul Jannah
Año
2026
Publicación
JURUTERA - Jurnal Umum Teknik Terapan
País
Indonesia
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · 1 máquinas
Periodo de observación
5 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
At PT XYZ, frequent empty-can jamming (infeed stuck) in the multi-to-single conveyor section caused significant filler machine downtime and reduced production efficiency.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 14Riesgo bajo
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—filler machine
Ver cita textual (Tabel 2)
Kecepatan Aktual (kaleng/jam) 36.300 47.760 +11.460 kaleng/jam
noneCapacidad de producción47,760 kaleng/jamAmbos extractores coincidieron
Infeed Stuckmulti-to-single conveyor / side guard (combiner plow)
Ver cita textual (Tabel 2)
Infeed Stuck (menit) 128,0 73,1 -54,9 menit
Microparos y esperasTiempo perdido73.1 menitAmbos extractores coincidieron
—
Ver cita textual (Tabel 2)
Overall Equipment Effectiveness (OEE) 55,36% 83,92% +28,56%
noneOEE55.4 %Ambos extractores coincidieron
—
Ver cita textual (Tabel 2)
Quality (Tingkat Kualitas) 99,82% 99,98% +0,16%
noneCalidad99.8 %Ambos extractores coincidieron
—
Ver cita textual (Tabel 2)
Performance (Efisiensi Kinerja) 75,63% 99,50% +23,87%
noneRendimiento75.6 %Ambos extractores coincidieron
—
Ver cita textual (Tabel 2)
Availability (Ketersediaan) 73,33% 84,77% +11,44%
noneDisponibilidad73.3 %Ambos extractores coincidieron
—filler machine
Ver cita textual (Tabel 2)
Kecepatan Aktual (kaleng/jam) 36.300 47.760 +11.460 kaleng/jam
noneCapacidad de producción36,300 kaleng/jamAmbos extractores coincidieron
Infeed Stuckmulti-to-single conveyor / side guard (combiner plow)
Ver cita textual (Tabel 2)
Infeed Stuck (menit) 128,0 73,1 -54,9 menit
Microparos y esperasTiempo perdido128 menitAmbos extractores coincidieron
—
Ver cita textual (Tabel 2)
Quality (Tingkat Kualitas) 99,82% 99,98% +0,16%
noneCalidad100.0 %Ambos extractores coincidieron
—
Ver cita textual (Tabel 2)
Overall Equipment Effectiveness (OEE) 55,36% 83,92% +28,56%
noneOEE83.9 %Ambos extractores coincidieron
Produk Cacat / Rejectmulti-to-single conveyor / filler
Ver cita textual (Tabel 2)
Produk Cacat / Reject (kaleng) 65 9 -56 kaleng
Defectos de proceso (desecho y reproceso)Número de eventos9.00 kalengAmbos extractores coincidieron
Produk Cacat / Rejectmulti-to-single conveyor / filler
Ver cita textual (Tabel 2)
Produk Cacat / Reject (kaleng) 65 9 -56 kaleng
Defectos de proceso (desecho y reproceso)Número de eventos65.0 kalengAmbos extractores coincidieron
—
Ver cita textual (Tabel 2)
Availability (Ketersediaan) 73,33% 84,77% +11,44%
noneDisponibilidad84.8 %Un solo extractor
—
Ver cita textual (Tabel 2)
Performance (Efisiensi Kinerja) 75,63% 99,50% +23,87%
noneRendimiento99.5 %Un solo extractor

Unidades de observación

  • Multi-to-single conveyor / filler line (PT XYZ), side guard 2° · Transporte y acumulación · Después de la intervención
  • Multi-to-single conveyor / filler line (PT XYZ), side guard 3° · Transporte y acumulación · Línea base