foratvise
Comenzar
Estudio incluido

การเพิ่มประสิทธิภาพกระบวนการบรรจุหีบห่อขวดน้ำอัดลม: การลดเวลาการ เปลี่ยนอะไหล่และการปรับตั้งค่าเครื่องจักรในสายการผลิต PET5

Abrir fuente

1Ficha bibliográfica

Autores
Suphattra Sriyanalugsana, Parita Paiyamee
Año
2025
Publicación
The Journal of Industrial Technology Suan Sunandha Rajabhat University
DOI
—
País
Thailand
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · 2 máquinas
Periodo de observación
30 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
พบว่าในกระบวนการนี้มีเครื่องบรรจุหีบห่อ 2 เครื่อง สำหรับบรรจุขวดน้ำอัดลมขนาดใหญ่ ประกอบ ด้วยขนาด 1.25, 1.5 และ 1.6 ลิตร

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 11Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—Shrink wrap packaging machine 1
Ver cita textual (Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 90 นาทีต่อรอบ และประสิทธิภาพการทำงานร้อยละ 87.9 สำหรับเครื่องที่ 1
Setups y ajustesTiempo perdido90.0 minUn solo extractor
—Shrink wrap packaging machine 1
Ver cita textual (Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 90 นาทีต่อรอบ และประสิทธิภาพการทำงานร้อยละ 87.9 สำหรับเครื่องที่ 1
noneRendimiento87.9 %Un solo extractor
Releasing the finger parts clamping systemFinger Parts clamping system
Ver cita textual (Table 2)
ปลดล็อคระบบจับยึด (Finger Parts) ในเครื่องพารามิเตอร์ 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Removing the front bottle guideGuide หน้าเครื่อง
Ver cita textual (Table 2)
ถอดตัวจัดแบ่งขวด (Guide) หน้าเครื่อง 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Removing the rear bottle guideGuide หลังเครื่อง
Ver cita textual (Table 2)
ถอดตัวจัดแบ่งขวด (Guide) หลังเครื่อง 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Adjusting the height of the fallen-bottle detection sensor unitชุดตรวจสอบขวดล้ม (sensor)
Ver cita textual (Table 2)
ปรับระยะความสูงชุดตรวจสอบขวดล้ม 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Adjusting the front conveyor belt distanceสายพานหน้าเครื่อง (conveyor belt)
Ver cita textual (Table 2)
ปรับระยะสายพานหน้าเครื่อง 1 5
Setups y ajustesTiempo perdido5.00 minUn solo extractor
Adjusting the front air-blowing unit distanceชุดเป่าลมหน้าเครื่อง
Ver cita textual (Table 2)
ปรับระยะชุดเป่าลมหน้าเครื่อง 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Adjusting the rear air-blowing unit distanceชุดเป่าลมหลังเครื่อง
Ver cita textual (Table 2)
ปรับระยะชุดเป่าลมหลังเครื่อง 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Adjusting the air-blowing unit distance on the parameter screen sideชุดเป่าลมด้านหน้าฝั่งจอพารามิเตอร์
Ver cita textual (Table 2)
ปรับระยะชุดเป่าลมด้านหน้าฝั่งจอพารามิเตอร์ 1 5
Setups y ajustesTiempo perdido5.00 minUn solo extractor
Changing the film guide bar to a double barราวนำฟิล์ม (Bar)
Ver cita textual (Table 2)
เปลี่ยนราว (Bar) พาฟิล์ม เป็นราวคู่ 1 5
Setups y ajustesTiempo perdido5.00 minUn solo extractor
Changing film size and film-holding equipmentอุปกรณ์ช่วยยึดฟิล์ม
Ver cita textual (Table 2)
เปลี่ยนขนาดฟิล์ม และอุปกรณ์ช่วยยึดฟิล์ม 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Switching up the film-cutting cutterคัตเตอร์แบ่งฟิล์ม
Ver cita textual (Table 2)
สับคัตเตอร์แบ่งฟิล์มขึ้น 1 5
Setups y ajustesTiempo perdido5.00 minUn solo extractor
—Shrink wrap packaging machine 1
Ver cita textual (Abstract)
ผลการวิจัยพบว่าการปรับปรุงสามารถลดเวลาการเปลี่ยนอะไหล่ ของเครื่องบรรจุหีบห่อที่ 1 จาก 90 นาที เหลือ 76 นาที (ลดลงร้อยละ 15.5)
Setups y ajustesTiempo perdido76.0 minUn solo extractor
—Shrink wrap packaging machine 1
Ver cita textual (สรุปและอภิปรายผล)
เครื่องบรรจุหีบห่อที่ 1 ประสิทธิภาพเพิ่มขึ้นจาก ร้อยละ 87.9 เป็นร้อยละ 96.2
noneRendimiento96.2 %Un solo extractor
—Shrink wrap packaging machine 2
Ver cita textual (Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 60 นาทีต่อรอบ และ ประสิทธิภาพการทำงานร้อยละ 94.2 สำหรับเครื่องที่ 2
Setups y ajustesTiempo perdido60.0 minUn solo extractor
—Shrink wrap packaging machine 2
Ver cita textual (Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 60 นาทีต่อรอบ และ ประสิทธิภาพการทำงานร้อยละ 94.2 สำหรับเครื่องที่ 2
noneRendimiento94.2 %Un solo extractor
Loading the operating program
Ver cita textual (Table 4)
โหลดโปรแกรม 1 5
Setups y ajustesTiempo perdido5.00 minUn solo extractor
Adjusting the entrance bottle guide scaleGuide ทางเข้า
Ver cita textual (Table 4)
ปรับระยะตัวจัดขวด (Guide) ทางเข้า 1 10
Setups y ajustesTiempo perdido10.0 minUn solo extractor
Adjusting the bottle pathway distance at the front and rear of the machineช่องทางเดินขวดหน้าและหลังเครื่อง
Ver cita textual (Table 4)
ปรับระยะช่องทางเดินขวดหน้าและหลังเครื่อง 1 15
Setups y ajustesTiempo perdido15.0 minUn solo extractor
Adjusting the fallen-bottle detection sensorเซ็นเซอร์ตรวจสอบขวดล้ม
Ver cita textual (Table 4)
ปรับเซ็นเซอร์ตรวจสอบขวดล้ม 1 15
Setups y ajustesTiempo perdido15.0 minUn solo extractor
Adjusting the bottle guide at the bottle-holding channelGuide ช่องประคองขวด
Ver cita textual (Table 4)
ปรับระยะตัวจัดขวด (Guide) ช่องประคองขวด 1 15
Setups y ajustesTiempo perdido15.0 minUn solo extractor
—Shrink wrap packaging machine 2
Ver cita textual (Abstract)
เครื่องบรรจุหีบห่อที่ 2 จาก 60 นาที เหลือ 48 นาที (ลดลงร้อยละ 20)
Setups y ajustesTiempo perdido48.0 minUn solo extractor
—Shrink wrap packaging machine 2
Ver cita textual (สรุปและอภิปรายผล)
เครื่องบรรจุหีบห่อที่ 2 ประสิทธิภาพเพิ่มขึ้นจากร้อยละ 94.2 เป็นร้อยละ 98.1
noneRendimiento98.1 %Un solo extractor
—packaging machine
Ver cita textual (Page 3, Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 90 นาทีต่อรอบ และประสิทธิภาพการทำงานร้อยละ 87.9 สำหรับเครื่องที่ 1
Setups y ajustesDuración media del evento90.0 minUn solo extractor
—
Ver cita textual (Page 3, Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 90 นาทีต่อรอบ และประสิทธิภาพการทำงานร้อยละ 87.9 สำหรับเครื่องที่ 1
noneOEE87.9 %Un solo extractor
—
Ver cita textual (Page 13, Results)
เครื่องบรรจุหีบห่อที่ 1 ประสิทธิภาพเพิ่มขึ้นจาก ร้อยละ 87.9 เป็นร้อยละ 96.2
noneOEE96.2 %Un solo extractor
—packaging machine
Ver cita textual (Page 3, Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 60 นาทีต่อรอบ และประสิทธิภาพการทำงานร้อยละ 94.2 สำหรับเครื่องที่ 2
Setups y ajustesDuración media del evento60.0 minUn solo extractor
—
Ver cita textual (Page 3, Introduction)
ระยะเวลาเปลี่ยนอะไหล่เฉลี่ย 60 นาทีต่อรอบ และประสิทธิภาพการทำงานร้อยละ 94.2 สำหรับเครื่องที่ 2
noneOEE94.2 %Un solo extractor
—
Ver cita textual (Page 13, Results)
เครื่องบรรจุหีบห่อที่ 2 ประสิทธิภาพเพิ่มขึ้นจากร้อยละ 94.2 เป็นร้อยละ 98.1
noneOEE98.1 %Un solo extractor

Unidades de observación

  • Packaging Machine 1 (PET5) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Packaging Machine 1 (PET5) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Packaging Machine 2 (PET5) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Packaging Machine 2 (PET5) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Packaging Machine 1 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Packaging Machine 1 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Packaging Machine 2 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Packaging Machine 2 · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención