Estudio incluido
Maintenance System Analysis Using the Total Productive Maintenance (TPM) Method
1Ficha bibliográfica
- Autores
- Yusril Ananta, Bayu Ilham Pradana
- Año
- 2025
- Publicación
- Jurnal Management Risiko dan Keuangan
- DOI
- —
- País
- Indonesia
- Segmento
- Azúcar y confitería
- Familia de procesos
- Molienda, extracción y separación
- Tipo de estudio
- Estudio de caso único
- Alcance de la extracción
- Solo resumen
- Tamaño
- 1 plantas · 1 líneas · — máquinas
- Periodo de observación
- —
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
This study aims to analyze the maintenance system of the mill station at PG Krebet Baru Unit of PT PG Rajawali I, evaluate its effectiveness, and provide recommendations for improving machinery and production equipment maintenance based on the Total Productive Maintenance (TPM) method.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 5Riesgo alto
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—mill stationVer cita textual (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | Calidad | 99.4 % | Ambos extractores coincidieron |
—mill stationVer cita textual (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | Rendimiento | 100.0 % | Ambos extractores coincidieron |
—mill stationVer cita textual (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | Disponibilidad | 99.2 % | Ambos extractores coincidieron |
—mill stationVer cita textual (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | OEE | 98.5 % | Ambos extractores coincidieron |
reduced speed lossesmill stationVer cita textual (Abstract)The Six Big Losses analysis indicates that the largest loss is reduced speed losses at 6.9%. | Velocidad reducida | Proporción del tiempo perdido | 6.90 % | Ambos extractores coincidieron |
Unidades de observación
- Mill station · Molienda · Línea base

