Estudio incluido
Robust DMAIC-Driven Optimization of Expansion Index in Cereal Extrusion Using DOE and SHAP-Based Factor Screening
1Ficha bibliográfica
- Autores
- Ángel Geovanny Guamán Lozano, Julio César Moyano Alulema, Jhofre Ramiro Guamán Quishpi
- Año
- 2026
- Publicación
- Industrial Engineering & Management Systems
- País
- —
- Segmento
- Snacks, café, té y otros alimentos
- Familia de procesos
- Formado, horneado y cocción
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Solo resumen
- Tamaño
- 1 plantas · 1 líneas · — máquinas
- Periodo de observación
- —
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
This study presents a DMAIC-driven framework to reduce variability and improve control of the Expansion Index(EI) in an industrial cereal extrusion line by integrating statistical experimentation with SHAP-based factor screening.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 5Riesgo alto
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—cereal extrusion lineVer cita textual (abstract)A baseline diagnosis from 203 EI observations showed an incapable process, with 597545.45 PPM out of specification, Ppk = 0.13, and instability in X̄ –S control charts. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 597,545 PPM | Un solo extractor |
unplanned downtimecereal extrusion lineVer cita textual (abstract)unplanned downtime decreasing from 600 to 300 min/week | No clasificable a partir del reporte | Tiempo perdido | 600 min/week | Un solo extractor |
—cereal extrusion lineVer cita textual (abstract)Post-improvement verification confirmed reduced variability, with standard deviation decreasing from 0.3544 to 0.06126, nonconformities falling to 17699.86 PPM, and unplanned downtime decreasing from 600 to 300 min/week. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 17,700 PPM | Un solo extractor |
unplanned downtimecereal extrusion lineVer cita textual (abstract)unplanned downtime decreasing from 600 to 300 min/week | No clasificable a partir del reporte | Tiempo perdido | 300 min/week | Un solo extractor |
Unidades de observación
- Industrial cereal extrusion line · Extrusión · Línea base
- Industrial cereal extrusion line · Extrusión · Después de la intervención

