foratvise
Comenzar
Estudio incluido

Continuous Improvement Using the DMAIC Method to Reduce Technical Breakdown in a Conveyor Tilting Machine

Abrir fuente

1Ficha bibliográfica

Autores
Andri Setio, Sunyoto, Sarbini
Año
2026
Publicación
International Journal of Research and Innovation in Social Science
País
Indonesia
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 2 líneas · 1 máquinas
Periodo de observación
365 días
Recolección de datos
maintenance_records
Intervención
Ver el contexto tal como lo describe el estudio
PT. ABC is a packaged-beverage company located in Pasuruan, East Java, Indonesia, established in 2012, with Teh Pucuk Harum (TPH) as its flagship product and a production capacity of up to 90,000 boxes per day.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
top-chain derailment without detectiontop chain
Ver cita textual (Section 4.3 Analyze / Figure 1)
top-chain derailment without detection was dominant, with five incidents (41.67% of frequency) and a loss contribution of 317 minutes, or 77.32% of total loss, far exceeding other types of failure.
Fallas de equipo (averías)Proporción del tiempo perdido77.3 %Ambos extractores coincidieron
top-chain derailment without detectiontop chain
Ver cita textual (Section 4.3 Analyze / Figure 1)
top-chain derailment without detection was dominant, with five incidents (41.67% of frequency) and a loss contribution of 317 minutes, or 77.32% of total loss, far exceeding other types of failure.
Fallas de equipo (averías)Tiempo perdido317 minAmbos extractores coincidieron
top-chain derailment without detectiontop chain
Ver cita textual (Section 4.3 Analyze / Figure 1)
top-chain derailment without detection was dominant, with five incidents (41.67% of frequency) and a loss contribution of 317 minutes, or 77.32% of total loss, far exceeding other types of failure.
Fallas de equipo (averías)Proporción de eventos de pérdida41.7 %Ambos extractores coincidieron
—conveyor tilting machine
Ver cita textual (Table 6)
Machine Availability 99.92% (8,753.17 ÷ 8,760) × 100%
noneDisponibilidad99.9 %Ambos extractores coincidieron
—conveyor tilting machine
Ver cita textual (Table 6)
MTTR 34.17 minutes/incident 410 min ÷ 12 incidents
Fallas de equipo (averías)Duración media del evento34.2 minutes/incidentAdjudicado
—conveyor tilting machine
Ver cita textual (Section 4.5 Control)
Total production loss decreased by 93.41% (from 410 to 27 minutes), MTBF increased by 148.38%, MTTR decreased by 60.49%, and Machine Availability rose from 99.92% to 99.99%.
Fallas de equipo (averías)Tiempo perdido27.0 minAmbos extractores coincidieron
—conveyor tilting machine
Ver cita textual (Section 4.5 Control)
MTBF = total uptime (3,623.55 hours) ÷ 2 incidents = 1,811.78 hours/failure; MTTR = 27 minutes ÷ 2 incidents = 13.5 minutes/incident; and Machine Availability = (3,623.55 ÷ 3,624) × 100% = 99.99%
Fallas de equipo (averías)Duración media del evento13.5 minutes/incidentAdjudicado
—conveyor tilting machine
Ver cita textual (Section 4.5 Control)
MTBF = total uptime (3,623.55 hours) ÷ 2 incidents = 1,811.78 hours/failure; MTTR = 27 minutes ÷ 2 incidents = 13.5 minutes/incident; and Machine Availability = (3,623.55 ÷ 3,624) × 100% = 99.99%
noneDisponibilidad100.0 %Ambos extractores coincidieron
—conveyor tilting machine
Ver cita textual (Section 4.5 Control)
MTBF = total uptime (3,623.55 hours) ÷ 2 incidents = 1,811.78 hours/failure; MTTR = 27 minutes ÷ 2 incidents = 13.5 minutes/incident; and Machine Availability = (3,623.55 ÷ 3,624) × 100% = 99.99%
Fallas de equipo (averías)Tiempo entre eventos1,812 hours/failureAdjudicado
—conveyor tilting machine
Ver cita textual (Abstract)
resulting in a total production loss of 410 minutes across 12 incidents during January–December 2025, mainly caused by the absence of an automatic detection system for top-chain derailment.
Fallas de equipo (averías)Tiempo perdido410 minUn solo extractor
—conveyor tilting machine
Ver cita textual (Table 6)
Number of TB incidents 12 incidents Historical data, Jan–Dec 2025
Fallas de equipo (averías)Número de eventos12.0 incidentsUn solo extractor
—conveyor tilting machine
Ver cita textual (Table 6)
MTBF 729.43 hours/failure 8,753.17 ÷ 12 incidents
Fallas de equipo (averías)Tiempo entre eventos729 hours/failureUn solo extractor
Top-chain derailmenttop chain
Ver cita textual (Table 5)
Top-chain derailment (13 min downtime, Shift 3) Detection response < 1 ms via proximity sensor
Fallas de equipo (averías)Tiempo perdido13.0 minUn solo extractor
Structural damage to support railsupport rail
Ver cita textual (Table 5)
Structural damage to support rail (180 min loss) Downtime from structural damage < 30 minutes
Fallas de equipo (averías)Tiempo perdido180 minUn solo extractor
Tilting chain repairtilting chain
Ver cita textual (Table 5)
Tilting chain repair (41 min MTTR) MTTR reduced through faster response time
Fallas de equipo (averías)Duración media del evento41.0 minUn solo extractor
Guider-out tilting damageguider
Ver cita textual (Table 5)
Guider-out tilting damage (29 min) Guider service life monitored via checklist
Fallas de equipo (averías)Tiempo perdido29.0 minUn solo extractor
Combined tilting & top-chain failure
Ver cita textual (Table 5)
Combined tilting & top-chain failure (100 min) Total production loss reduced from the 410-min baseline
Fallas de equipo (averías)Tiempo perdido100 minUn solo extractor
—conveyor tilting machine
Ver cita textual (Table 9)
Number of TB incidents 12 incidents 2 incidents ↓ 83.33%
Fallas de equipo (averías)Número de eventos2.00 incidentsUn solo extractor
—
Ver cita textual (Section 4.1 Define)
far exceeding Line 1, which recorded only 132 minutes over the same period.
Fallas de equipo (averías)Tiempo perdido132 minUn solo extractor
—
Ver cita textual (Abstract and Measure phase, page 6)
a DPMO of 83,333
noneTasa de defectos83,333 DPMOUn solo extractor
—
Ver cita textual (Abstract and Measure phase, page 6)
a Sigma Level of 2.88σ
noneCalidad2.88 σUn solo extractor
—
Ver cita textual (Abstract and Measure phase, page 6)
a process capability index (Cp) of 0.96
noneCalidad0.960 indexUn solo extractor
—
Ver cita textual (Abstract and Table 9, page 9)
DPMO 83,333 33,333 ↓ 60%
noneTasa de defectos33,333 DPMOUn solo extractor
—
Ver cita textual (Table 9, page 9)
Sigma Level 2.88 σ 3.33 σ ↑ 0.45 σ
noneCalidad3.33 σUn solo extractor
—
Ver cita textual (Table 9, page 9)
Capability Index (Cp) 0.96 (poor) 1.11 (good) ↑ 0.15
noneCalidad1.11 indexUn solo extractor

Unidades de observación

  • Line 2 tilting machine · Esterilización (autoclave, UHT) · Línea base
  • Line 2 tilting machine · Esterilización (autoclave, UHT) · Después de la intervención
  • Line 1 · Línea completa o equipo sin especificar · Línea base
  • Line 2 Tilting Machine · Transporte y acumulación · Línea base
  • Line 2 Tilting Machine · Transporte y acumulación · Después de la intervención