Boiler minor stoppage
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 52 % der Verlustzeit der Linie. Berichtet von 0 der 131 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
A brief interruption in boiler operation occurs when a transient process upset, such as a momentary low water level, flame instability, or a pressure or temperature excursion, triggers an automatic safety cutout or prompts the operator to pause the unit. The condition clears quickly once the parameter returns to normal, so the boiler is restarted without any repair or maintenance action, and the stop is cleared directly by the operator.
Was man dagegen tut
Stabilize water level and pressure control loops with properly tuned feedwater and firing controls, and keep burner and sensor components under routine preventive maintenance to reduce transient trips. Train operators on fast, standardized reset procedures and review recurring minor-alarm patterns to identify and correct underlying instability before it escalates.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,3 % [0,1–1,0 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,5 %]
- Anteil an der Verlustzeit bei Auftreten
- 52 % [40–64 %]
- Studien / Einheiten
- 131 / 165
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,5 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,3 %]26 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,6 %]12 Studien
- Backwaren und Teigwaren0,4 % [0,0–1,4 %]25 Studien
- Fleisch, Geflügel und Fisch0,4 % [0,0–1,6 %]9 Studien
- Obst- und Gemüseverarbeitung0,4 % [0,0–1,7 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,4 % [0,0–1,6 %]7 Studien
- Zucker und Süßwaren0,4 % [0,0–1,6 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,4 % [0,0–1,5 %]5 Studien
- Futtermittel und Heimtiernahrung0,4 % [0,0–1,5 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,6 %]11 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseA brief interruption in boiler operation occurs when a transient process upset, such as a momentary low water level, flame instability, or a pressure or temperature excursion, triggers an automatic safety cutout or prompts the operator to pause the unit. The condition clears quickly once the parameter returns to normal, so the boiler is restarted without any repair or maintenance action, and the stop is cleared directly by the operator.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseThe SCADA or MES log shows short-duration transitions of the boiler state to standby or off, with frequent start-stop cycling over a given period. Associated alarms such as low water level, flame failure, or pressure or temperature deviation appear and self-clear within a short window, and the steam or hot-water output trend shows brief dips coinciding with downstream starvation of utility-fed equipment.
Gegenmaßnahme
Ingenieurpraktische HinweiseStabilize water level and pressure control loops with properly tuned feedwater and firing controls, and keep burner and sensor components under routine preventive maintenance to reduce transient trips. Train operators on fast, standardized reset procedures and review recurring minor-alarm patterns to identify and correct underlying instability before it escalates.
4Quellen
- Productivity Analysis And Engineering Of Oil Palm Factory Productivity Process On Boiler Work Effectiveness At PTPN III PKS Sei Mangkei (2022)Quelle öffnenAnteil an der Verlustzeit: 0,620 % · laut Bericht: “idling minor stoppages”
Wörtliches Zitat anzeigen
From the analysis of the six big losses, it is known that the causes of the low OEE value are reduced speed losses by 79.01%, breakdown by 9.17%, idling minor stoppages 0.62%, setup and adjustment 0.67%, scrap/yield losses 10.51% and rework losses 0%.

