Boiler startup warm-up yield loss
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 1 der 131 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
When the boiler is started after a shutdown or stop, it must ramp up pressure and temperature before it can deliver steam of the quality and stability needed by downstream processes; during this warm-up phase feedwater, condensate and initial steam are blown down, vented or diverted because they do not meet the required specification. The resulting loss of water, energy and, indirectly, product output is charged to the startup period rather than to stable production.
Was man dagegen tut
Standardize and optimize the startup sequence with staged pre-heating and ramp rates, use thermal storage or accumulators to buffer demand during warm-up, improve feedwater conditioning to shorten the out-of-spec period, and schedule starts to minimize the number of cold startups per shift or campaign.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,3 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,7 %]
- Anteil an der Verlustzeit bei Auftreten
- 48 % [29–66 %]
- Studien / Einheiten
- 131 / 165
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,5 % [0,1–2,1 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,5 % [0,0–1,7 %]26 Studien
- Bier, Wein und Spirituosen0,5 % [0,0–2,0 %]12 Studien
- Backwaren und Teigwaren0,5 % [0,0–1,8 %]25 Studien
- Fleisch, Geflügel und Fisch0,5 % [0,0–2,0 %]9 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,0–2,2 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,8 % [0,1–3,2 %]7 Studien
- Zucker und Süßwaren0,5 % [0,0–2,0 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,5 % [0,0–2,2 %]5 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,1–2,1 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,5 % [0,0–2,1 %]11 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseWhen the boiler is started after a shutdown or stop, it must ramp up pressure and temperature before it can deliver steam of the quality and stability needed by downstream processes; during this warm-up phase feedwater, condensate and initial steam are blown down, vented or diverted because they do not meet the required specification. The resulting loss of water, energy and, indirectly, product output is charged to the startup period rather than to stable production.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES trends show a startup ramp in boiler pressure and temperature signals, extended blowdown or vent valve open times, steam quality or conductivity readings outside normal band until stabilization, a dedicated startup-state timer, and downstream equipment held in standby or starved state while waiting for steam availability.
Gegenmaßnahme
Ingenieurpraktische HinweiseStandardize and optimize the startup sequence with staged pre-heating and ramp rates, use thermal storage or accumulators to buffer demand during warm-up, improve feedwater conditioning to shorten the out-of-spec period, and schedule starts to minimize the number of cold startups per shift or campaign.
4Quellen
- Productivity Analysis And Engineering Of Oil Palm Factory Productivity Process On Boiler Work Effectiveness At PTPN III PKS Sei Mangkei (2022)Quelle öffnenAnteil an der Verlustzeit: 10,5 % · laut Bericht: “scrap/yield losses”
Wörtliches Zitat anzeigen
From the analysis of the six big losses, it is known that the causes of the low OEE value are reduced speed losses by 79.01%, breakdown by 9.17%, idling minor stoppages 0.62%, setup and adjustment 0.67%, scrap/yield losses 10.51% and rework losses 0%.

