Bottle jam on spiral infeed screw
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 52 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The rotating spiral (worm) screw that spaces and guides incoming bottles toward the filling stations can trap, tilt or wedge a container when it is misaligned, deformed, oversized or arrives with an irregular pitch relative to the thread. The bottle becomes physically obstructed between the screw flights and the guide rail, stopping its forward progression and blocking the infeed path for following containers.
Was man dagegen tut
Operator clears the jammed bottle manually and restarts the infeed; preventive actions include verifying bottle dimensional tolerances, adjusting screw pitch/guide rail clearance, and performing routine alignment and wear inspection of the spiral drive.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,3 % [0,1–1,0 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,5 %]
- Anteil an der Verlustzeit bei Auftreten
- 52 % [40–64 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,5 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,3 % [0,0–1,2 %]44 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,5 %]16 Studien
- Backwaren und Teigwaren0,4 % [0,0–1,7 %]0 Studien
- Fleisch, Geflügel und Fisch0,4 % [0,0–1,6 %]6 Studien
- Obst- und Gemüseverarbeitung0,4 % [0,0–1,6 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,4 % [0,0–1,6 %]6 Studien
- Zucker und Süßwaren0,4 % [0,0–1,6 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,4 % [0,0–1,5 %]6 Studien
- Futtermittel und Heimtiernahrung0,4 % [0,0–1,7 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,5 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe rotating spiral (worm) screw that spaces and guides incoming bottles toward the filling stations can trap, tilt or wedge a container when it is misaligned, deformed, oversized or arrives with an irregular pitch relative to the thread. The bottle becomes physically obstructed between the screw flights and the guide rail, stopping its forward progression and blocking the infeed path for following containers.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES shows a short machine microstop or infeed-sensor fault code with very brief duration, often paired with a photoeye or proximity sensor at the spiral section reporting a continuous blocked state until operator clearance. Downstream filling valves may show starvation while upstream conveyors show blocking/back-up accumulation during the event.
Gegenmaßnahme
Ingenieurpraktische HinweiseOperator clears the jammed bottle manually and restarts the infeed; preventive actions include verifying bottle dimensional tolerances, adjusting screw pitch/guide rail clearance, and performing routine alignment and wear inspection of the spiral drive.
4Quellen
- A SEMINAR PAPER ON “OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY AT A BOTTLING PLANT” (2023)Quelle öffnenAnzahl der Ereignisse: 2,00 events · laut Bericht: “Bottle obstruted on spiral drive”
Wörtliches Zitat anzeigen
7 Bottle obstruted on spiral drive 2 61 100%

