foratvise
Loslegen
Leerlauf und Kurzstillstände

Bottle jam or fall on conveyor

Leerlauf und KurzstillständeLeistungAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 53 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Bottles lose stable positioning on the conveyor near the filler due to guide rail misalignment, speed mismatch between conveyor sections, uneven bottle base or surface friction, or accumulation pressure, causing them to tip over or wedge against rails and neighbouring containers. The resulting fallen or jammed bottle blocks the flow of containers until an operator clears it.</br>

Was man dagegen tut

Align and adjust conveyor guide rails and star wheels to the bottle format, synchronize speeds between conveyor sections and the filler, and install or recalibrate photoeyes to detect fallen or jammed containers early so operators can clear them quickly. Regular preventive checks of rail wear and bottle stability testing for new formats reduce recurrence.</br>

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,3 % [0,1–1,1 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,6 %]
Anteil an der Verlustzeit bei Auftreten
53 % [40–64 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,5 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,3 % [0,0–1,2 %]44 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,5 %]16 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,8 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,4 % [0,0–1,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,4 % [0,0–1,7 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,4 % [0,0–1,8 %]6 Studien
  • Zucker und Süßwaren
    0,4 % [0,0–1,7 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,4 % [0,0–1,6 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,8 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,7 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Bottles lose stable positioning on the conveyor near the filler due to guide rail misalignment, speed mismatch between conveyor sections, uneven bottle base or surface friction, or accumulation pressure, causing them to tip over or wedge against rails and neighbouring containers. The resulting fallen or jammed bottle blocks the flow of containers until an operator clears it.</br>

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES logs show frequent short stop events at the filler infeed or conveyor zone, often paired with photoeye or sensor blocked alarms and a rise in minor-stop counters without any maintenance work order. Upstream equipment shows blocking and downstream filling heads show starvation during these short gaps, with cycle time variability on the conveyor section preceding the fault location.</br>

Gegenmaßnahme

Ingenieurpraktische Hinweise

Align and adjust conveyor guide rails and star wheels to the bottle format, synchronize speeds between conveyor sections and the filler, and install or recalibrate photoeyes to detect fallen or jammed containers early so operators can clear them quickly. Regular preventive checks of rail wear and bottle stability testing for new formats reduce recurrence.</br>

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anzahl der Ereignisse: 21,0 events · laut Bericht: “Bottle falling”
    Wörtliches Zitat anzeigen
    1 Bottle falling 21 21 34%
  2. Anzahl der Ereignisse: 2,00 events · laut Bericht: “Bottle jam”
    Wörtliches Zitat anzeigen
    6 Bottle jam 2 59 97%