foratvise
Loslegen
Anlagenausfall (Störungen)

Metal conveyor chain/track failure

Anlagenausfall (Störungen)VerfügbarkeitFördern und Puffern

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 86 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Wear, elongation, misalignment or breakage of the metal chain, links or track that drives the conveyor section causes the mechanism to bind, derail or stop moving, interrupting the flow of product along the line. Because the damaged component cannot be cleared by a simple operator reset, a mechanical intervention is needed to realign, repair or replace the affected part.

Was man dagegen tut

Implement a preventive maintenance routine that inspects chain tension, lubrication, wear on links and sprockets, and track alignment, replacing worn components before they reach failure. Install condition-monitoring sensors (current, vibration, tension) to trigger early warnings and schedule replacement during planned downtime.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,7 % [0,1–1,8 %]
Erwarteter Anteil an der Verlustzeit
0,4 % [0,1–1,0 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–67 %]
Studien / Einheiten
86 / 112
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,8 % [0,1–2,8 %]11 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,9 % [0,1–2,9 %]28 Studien
  • Bier, Wein und Spirituosen
    0,7 % [0,1–2,5 %]12 Studien
  • Backwaren und Teigwaren
    0,8 % [0,1–3,0 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,8 % [0,1–2,9 %]5 Studien
  • Obst- und Gemüseverarbeitung
    0,8 % [0,1–3,0 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,8 % [0,1–2,9 %]4 Studien
  • Zucker und Süßwaren
    0,8 % [0,1–3,1 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,8 % [0,1–2,8 %]4 Studien
  • Futtermittel und Heimtiernahrung
    0,8 % [0,1–3,1 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,8 % [0,1–2,8 %]9 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Wear, elongation, misalignment or breakage of the metal chain, links or track that drives the conveyor section causes the mechanism to bind, derail or stop moving, interrupting the flow of product along the line. Because the damaged component cannot be cleared by a simple operator reset, a mechanical intervention is needed to realign, repair or replace the affected part.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

Shows up as an unplanned stop state on the conveyor drive with motor current or torque spikes followed by a drive fault or overload trip, and no product-jam sensor flag. Upstream and downstream equipment register starvation or blocking states while the conveyor remains stopped, and the event duration is consistent with a maintenance-logged repair rather than an operator-cleared minor stop.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement a preventive maintenance routine that inspects chain tension, lubrication, wear on links and sprockets, and track alignment, replacing worn components before they reach failure. Install condition-monitoring sensors (current, vibration, tension) to trigger early warnings and schedule replacement during planned downtime.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an den Verlustereignissen: 66,0 % · laut Bericht: “Desgaste das correntes”
    Wörtliches Zitat anzeigen
    Desgaste das correntes gerando quebras nas esteiras de acordo com os dados históricos representava 66 % das ocorrências, sendo assim validada como causa-raiz.
  2. Verlustzeit: 3,00 h · laut Bericht: “Metal jalan”
    Wörtliches Zitat anzeigen
    Metal jalan | Suara kasar, asap hitam akibat keausan | Teknisi eksternal | Rp187.000 | 3 Jam 0 Menit