Crown cap sorter sensor malfunction
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The optical or inductive sensor that detects orientation or presence of crown caps in the sorter bowl degrades, gets fouled, or loses calibration, so the sorter can no longer correctly discriminate properly oriented caps from misaligned ones. This causes the sorter to stop feeding caps to the capping head or to feed them erratically, interrupting the closing process on the filling line.
Was man dagegen tut
Implement scheduled cleaning and calibration checks of the sorter sensors, replace sensors showing drift before failure, and use redundant or self-diagnostic sensors with automatic alarm thresholds. Keep spare sensor modules on hand for fast swap to minimize line stoppage.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–67 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,7 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,4 %]44 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,6 %]16 Studien
- Backwaren und Teigwaren0,5 % [0,0–1,9 %]0 Studien
- Fleisch, Geflügel und Fisch0,5 % [0,0–1,9 %]6 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–1,8 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,5 % [0,0–1,8 %]6 Studien
- Zucker und Süßwaren0,5 % [0,0–1,7 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,5 % [0,0–1,8 %]6 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,0–1,7 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,6 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe optical or inductive sensor that detects orientation or presence of crown caps in the sorter bowl degrades, gets fouled, or loses calibration, so the sorter can no longer correctly discriminate properly oriented caps from misaligned ones. This causes the sorter to stop feeding caps to the capping head or to feed them erratically, interrupting the closing process on the filling line.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES shows a discrete sensor fault alarm or signal-out-of-range flag on the crown sorter, followed by a drop in cap feed rate or empty-chute detection, and a machine-state transition to fault/stopped. The downstream capper and upstream filler typically register starvation or idle states correlated in time with the sorter alarm.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement scheduled cleaning and calibration checks of the sorter sensors, replace sensors showing drift before failure, and use redundant or self-diagnostic sensors with automatic alarm thresholds. Keep spare sensor modules on hand for fast swap to minimize line stoppage.
4Quellen
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 8,00 min · laut Bericht: “Crown sorter sensor malfunction”
Wörtliches Zitat anzeigen
Crown sorter sensor malfunction 0 8 0 0 0 0 8 0.55
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 0,550 % · laut Bericht: “Crown sorter sensor malfunction”
Wörtliches Zitat anzeigen
Crown sorter sensor malfunction 0 8 0 0 0 0 8 0.55

