Expedition feed conveyor failure
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 1 der 86 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
One of the several feed entry points that supply finished product onto the expedition/dispatch conveyor loses function due to a mechanical, electrical or sensor fault, stopping the transfer of units at that entry. Because several entries feed the same downstream conveying path, a fault at any single entry point halts product flow from that source until repaired.
Was man dagegen tut
Apply condition monitoring and scheduled preventive maintenance on motors, rollers, chains and sensors at each feed entry point, and standardize quick-swap spare modules to restore the affected entry without stopping the other feed points.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,7 % [0,1–2,0 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,1 %]
- Anteil an der Verlustzeit bei Auftreten
- 58 % [47–68 %]
- Studien / Einheiten
- 86 / 112
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,8 % [0,1–3,1 %]11 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,7 % [0,1–2,3 %]28 Studien
- Bier, Wein und Spirituosen0,8 % [0,1–2,7 %]12 Studien
- Backwaren und Teigwaren0,8 % [0,1–3,2 %]0 Studien
- Fleisch, Geflügel und Fisch0,8 % [0,1–2,8 %]5 Studien
- Obst- und Gemüseverarbeitung0,8 % [0,1–2,9 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,8 % [0,1–3,1 %]4 Studien
- Zucker und Süßwaren0,8 % [0,1–2,9 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,8 % [0,1–2,9 %]4 Studien
- Futtermittel und Heimtiernahrung1,2 % [0,1–4,6 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,8 % [0,1–2,9 %]9 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseOne of the several feed entry points that supply finished product onto the expedition/dispatch conveyor loses function due to a mechanical, electrical or sensor fault, stopping the transfer of units at that entry. Because several entries feed the same downstream conveying path, a fault at any single entry point halts product flow from that source until repaired.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show a fault or stop alarm localized to a specific feed entry point on the expedition conveyor, with motor current drop or drive fault code, while other entries remain active; downstream expedition buffer shows starvation from that branch and the associated entry counter freezes.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply condition monitoring and scheduled preventive maintenance on motors, rollers, chains and sensors at each feed entry point, and standardize quick-swap spare modules to restore the affected entry without stopping the other feed points.
4Quellen
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,106 Kg.h-1 · laut Bericht: “Expedition (feed, first entry)”
Wörtliches Zitat anzeigen
5Expedition 10.24 0.010 ± 0.003 0.106 ± 0.031 Kg 1.32
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,123 Kg.h-1 · laut Bericht: “Expedition (feed, second entry)”
Wörtliches Zitat anzeigen
5Expedition 10.24 0.012 ± 0.004 0.123 ± 0.041 Kg 1.53
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,134 Kg.h-1 · laut Bericht: “Expedition (feed, third entry)”
Wörtliches Zitat anzeigen
5Expedition 10.24 0.013 ± 0.002 0.134 ± 0.020 Kg 1.67
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,120 Kg.h-1 · laut Bericht: “Expedition (feed, fourth entry)”
Wörtliches Zitat anzeigen
5Expedition 10.24 0.012 ± 0.005 0.120 ± 0.051 Kg 1.49
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,135 Kg.h-1 · laut Bericht: “Expedition (feed, fifth entry)”
Wörtliches Zitat anzeigen
5Expedition 10.24 0.013 ± 0.004 0.135 ± 0.041 Kg 1.69

