Filler inlet guide jam/failure
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 2 der 120 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
Containers entering the filler infeed become trapped, tilted or wedged against the guide rails due to misalignment, wear or mechanical damage of the guide components, interrupting the smooth transfer of containers into the filling stations. When the guide itself fails or deforms, the infeed lane jams repeatedly and requires mechanical repair rather than a simple operator clear.
Was man dagegen tut
Inspect and realign or replace worn/bent guide rails and adjust them to the current container format, add wear-resistant materials or sensors to detect incipient jams, and include the guide assembly in scheduled preventive maintenance.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,8 % [0,2–1,9 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,1 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,2 % [0,2–3,9 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,9 % [0,1–2,7 %]44 Studien
- Bier, Wein und Spirituosen0,8 % [0,1–2,8 %]16 Studien
- Backwaren und Teigwaren1,0 % [0,1–3,6 %]0 Studien
- Fleisch, Geflügel und Fisch0,9 % [0,1–2,9 %]6 Studien
- Obst- und Gemüseverarbeitung0,9 % [0,1–3,3 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,9 % [0,1–3,2 %]6 Studien
- Zucker und Süßwaren0,9 % [0,1–3,6 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,9 % [0,1–3,0 %]6 Studien
- Futtermittel und Heimtiernahrung0,9 % [0,1–3,2 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,9 % [0,1–3,0 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseContainers entering the filler infeed become trapped, tilted or wedged against the guide rails due to misalignment, wear or mechanical damage of the guide components, interrupting the smooth transfer of containers into the filling stations. When the guide itself fails or deforms, the infeed lane jams repeatedly and requires mechanical repair rather than a simple operator clear.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseInfeed guide fault or jam alarm with the filler held in a non-productive state, repeated stoppages localized at the guide/infeed station, container presence sensors oscillating or stuck, and blocking of upstream conveying while the filler infeed is cleared or repaired.
Gegenmaßnahme
Ingenieurpraktische HinweiseInspect and realign or replace worn/bent guide rails and adjust them to the current container format, add wear-resistant materials or sensors to detect incipient jams, and include the guide assembly in scheduled preventive maintenance.
4Quellen
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Quelle öffnenVerlustzeit: 430 min · laut Bericht: “guide inlet filler”
Wörtliches Zitat anzeigen
guide inlet filler 16 430 80 2265 71.42 64.42
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Quelle öffnenAnzahl der Ereignisse: 16,0 events · laut Bericht: “guide inlet filler”
Wörtliches Zitat anzeigen
guide inlet filler 16 430 80 2265 71.42 64.42
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenVerlustzeit: 7,60 h · laut Bericht: “Guide jam”
Wörtliches Zitat anzeigen
Atasco de guía 7,60 81%

