foratvise
Loslegen
Anlagenausfall (Störungen)

Filler product bowl malfunction

Anlagenausfall (Störungen)VerfügbarkeitAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The product bowl that feeds product to the filling heads develops a mechanical or sensor fault (level sensor, valve, seal, agitator or drive) that disrupts the supply of product to the filler. This either stops the filler outright or leaves product flowing in an inconsistent, non-uniform state so that the fill delivered to each container is incorrect.

Was man dagegen tut

Apply preventive maintenance to the bowl's level sensors, seals, agitator and drive, and recalibrate the level control loop so product supply to the filling valves remains stable. Inspect and replace worn components during scheduled stops and add condition monitoring on the bowl subsystem to catch degradation before it causes a stop or a fill defect.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,4 % [0,1–1,1 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,7 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–67 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,7 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,4 % [0,0–1,4 %]44 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,7 %]16 Studien
  • Backwaren und Teigwaren
    0,5 % [0,0–1,8 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,5 % [0,0–1,6 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,5 % [0,0–1,9 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,5 % [0,0–1,8 %]6 Studien
  • Zucker und Süßwaren
    0,5 % [0,0–1,7 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,5 % [0,0–1,8 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,5 % [0,0–1,8 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,7 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The product bowl that feeds product to the filling heads develops a mechanical or sensor fault (level sensor, valve, seal, agitator or drive) that disrupts the supply of product to the filler. This either stops the filler outright or leaves product flowing in an inconsistent, non-uniform state so that the fill delivered to each container is incorrect.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

Level or pressure alarms on the bowl precede filler stopped-state events, with the filler fault code pointing to the bowl/hopper subsystem rather than the dosing valves themselves. Fill-weight or fill-volume trend data shows drift or out-of-tolerance readings time-correlated with bowl low/high level or agitator fault flags, and upstream/downstream conveyors show starvation or blocking consistent with the filler stop.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Apply preventive maintenance to the bowl's level sensors, seals, agitator and drive, and recalibrate the level control loop so product supply to the filling valves remains stable. Inspect and replace worn components during scheduled stops and add condition monitoring on the bowl subsystem to catch degradation before it causes a stop or a fill defect.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 165 min · laut Bericht: “product bowl”
    Wörtliches Zitat anzeigen
    product bowl 1 165 112 3516 100 100
  2. Anzahl der Ereignisse: 1,00 events · laut Bericht: “product bowl”
    Wörtliches Zitat anzeigen
    product bowl 1 165 112 3516 100 100
  3. Verlustzeit: 30,0 kg · laut Bericht: “defect product”
    Wörtliches Zitat anzeigen
    The losses from defect products caused by the disruption of the production process and the reduction in the production volume amounted to LDP = 30 kg.
  4. Spezifischer Energiebedarf: 213 Wh/1000 Bottles · laut Bericht: “Production”
    Wörtliches Zitat anzeigen
    Production 119 4290.2 117 212.8 121 581.6