Filler support/bracket mechanical failure
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
A structural or mechanical support element of the filling station (bracket, frame support, or guide that holds moving parts in position) wears, loosens, cracks or breaks under repeated vibration and mechanical load. This causes misalignment of the filling heads, nozzles or container-handling mechanism, leading to loss of function until the part is repaired or replaced.
Was man dagegen tut
Implement scheduled inspection and preventive replacement of wear-prone support and bracket components based on condition monitoring (vibration, visual cracking checks), and reinforce or redesign the mount if recurring failures indicate an undersized or fatigued part.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,7 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–68 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,6 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,3 %]44 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,6 %]16 Studien
- Backwaren und Teigwaren0,5 % [0,0–1,9 %]0 Studien
- Fleisch, Geflügel und Fisch0,5 % [0,0–1,8 %]6 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–1,9 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,5 % [0,0–1,8 %]6 Studien
- Zucker und Süßwaren0,5 % [0,0–1,9 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,5 % [0,0–1,7 %]6 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,0–1,7 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,6 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseA structural or mechanical support element of the filling station (bracket, frame support, or guide that holds moving parts in position) wears, loosens, cracks or breaks under repeated vibration and mechanical load. This causes misalignment of the filling heads, nozzles or container-handling mechanism, leading to loss of function until the part is repaired or replaced.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseUnplanned downtime event logged at the filler with a fault or mechanical-stop alarm, often preceded by vibration, position or torque deviations on related axes. Repeated short stoppages or a single extended stop state appear, with the filler state changing to fault/maintenance and upstream/downstream equipment entering blocked or starved states.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement scheduled inspection and preventive replacement of wear-prone support and bracket components based on condition monitoring (vibration, visual cracking checks), and reinforce or redesign the mount if recurring failures indicate an undersized or fatigued part.
4Quellen
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenZeit zwischen Ereignissen: 27,7 not reported · laut Bericht: “Spie Support”
Wörtliches Zitat anzeigen
Waktu Kerusakan Lognormal MTTF 27,664
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenMittlere Ereignisdauer: 248 not reported · laut Bericht: “Spie Support”
Wörtliches Zitat anzeigen
Waktu Perbaikan Weibull MTTR 248

