foratvise
Loslegen
Anlagenausfall (Störungen)

Helical screw conveyor failure

Anlagenausfall (Störungen)VerfügbarkeitFördern und Puffern

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 59 % der Verlustzeit der Linie. Berichtet von 2 der 86 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The helical screw (helix) that moves product or containers along the conveyor section loses mechanical integrity due to wear, fatigue, misalignment, bearing or drive-shaft failure, or jamming by foreign material, which stops or degrades its rotation. This interrupts the transport function and requires a maintenance intervention to repair or replace the affected component before the conveyor can resume normal operation.

Was man dagegen tut

Implement scheduled inspection and lubrication of bearings, drive shaft and helix flighting, with vibration or current monitoring to detect wear before failure, and install guarding or magnetic/metal detection to prevent foreign-material jams. When failure occurs, perform root-cause repair (shaft alignment, bearing replacement, or flighting refurbishment) rather than temporary fixes to avoid recurrence.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,7 % [0,1–1,8 %]
Erwarteter Anteil an der Verlustzeit
0,4 % [0,1–1,1 %]
Anteil an der Verlustzeit bei Auftreten
59 % [48–69 %]
Studien / Einheiten
86 / 112
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,8 % [0,1–2,8 %]11 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,9 % [0,1–2,9 %]28 Studien
  • Bier, Wein und Spirituosen
    0,8 % [0,1–2,8 %]12 Studien
  • Backwaren und Teigwaren
    0,8 % [0,1–3,1 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,8 % [0,1–2,9 %]5 Studien
  • Obst- und Gemüseverarbeitung
    0,8 % [0,1–2,9 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,8 % [0,1–3,0 %]4 Studien
  • Zucker und Süßwaren
    0,8 % [0,1–3,0 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,8 % [0,1–2,9 %]4 Studien
  • Futtermittel und Heimtiernahrung
    0,8 % [0,1–2,9 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,8 % [0,1–2,9 %]9 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The helical screw (helix) that moves product or containers along the conveyor section loses mechanical integrity due to wear, fatigue, misalignment, bearing or drive-shaft failure, or jamming by foreign material, which stops or degrades its rotation. This interrupts the transport function and requires a maintenance intervention to repair or replace the affected component before the conveyor can resume normal operation.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES logs show the helix drive motor fault or overload alarm, motor current spike followed by trip, or a sustained drop to zero conveyor speed/output while upstream and downstream stations show starvation or blocking. The equipment state log records an unplanned stop event attributed to the conveying station, often correlated with a maintenance work order and extended downtime duration.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement scheduled inspection and lubrication of bearings, drive shaft and helix flighting, with vibration or current monitoring to detect wear before failure, and install guarding or magnetic/metal detection to prevent foreign-material jams. When failure occurs, perform root-cause repair (shaft alignment, bearing replacement, or flighting refurbishment) rather than temporary fixes to avoid recurrence.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anzahl der Ereignisse: 72,0 events · laut Bericht: “Helix”
    Wörtliches Zitat anzeigen
    HELİX | Helix | 72
  2. Anzahl der Ereignisse: 72,0 events · laut Bericht: “Helix”
    Wörtliches Zitat anzeigen
    HELİX | Helix | 72