Infeed screw/worm malfunction or jam
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 2 der 120 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
The infeed worm/screw meters and spaces containers at a fixed pitch to hand them off to the filler; mechanical wear, loose or worn timing settings, electrical/drive faults, or containers wedging between the screw flights disrupt this metered flow. When the timing drifts or a mechanical trip occurs the unit stops feeding containers, and when containers jam physically between the screw and guide rails the infeed path blocks until cleared.
Was man dagegen tut
Perform preventive maintenance and periodic inspection of the infeed screw drive, bearings, and timing mechanism, recalibrating the worm timing to the container format in use; clear jams promptly and add or tune container-presence/guide sensors to reduce misfeeds and trips.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,7 % [0,2–2,0 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,1 %]
- Anteil an der Verlustzeit bei Auftreten
- 58 % [46–68 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,8 % [0,1–2,7 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,2 % [0,2–3,2 %]44 Studien
- Bier, Wein und Spirituosen0,8 % [0,1–2,7 %]16 Studien
- Backwaren und Teigwaren0,9 % [0,1–3,4 %]0 Studien
- Fleisch, Geflügel und Fisch0,8 % [0,1–2,8 %]6 Studien
- Obst- und Gemüseverarbeitung0,9 % [0,1–3,2 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,9 % [0,1–3,1 %]6 Studien
- Zucker und Süßwaren0,9 % [0,1–3,4 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,8 % [0,1–2,9 %]6 Studien
- Futtermittel und Heimtiernahrung0,9 % [0,1–3,2 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,8 % [0,1–2,9 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe infeed worm/screw meters and spaces containers at a fixed pitch to hand them off to the filler; mechanical wear, loose or worn timing settings, electrical/drive faults, or containers wedging between the screw flights disrupt this metered flow. When the timing drifts or a mechanical trip occurs the unit stops feeding containers, and when containers jam physically between the screw and guide rails the infeed path blocks until cleared.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show infeed drive trip or fault alarms, screw motor stop states, and repeated short-duration downtime events tagged as jams at the infeed station, often accompanied by container-presence sensor flutter and downstream filler starvation (filler idle while waiting for containers).
Gegenmaßnahme
Ingenieurpraktische HinweisePerform preventive maintenance and periodic inspection of the infeed screw drive, bearings, and timing mechanism, recalibrating the worm timing to the container format in use; clear jams promptly and add or tune container-presence/guide sensors to reduce misfeeds and trips.
4Quellen
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 71,0 min · laut Bericht: “Infeed jam”
Wörtliches Zitat anzeigen
Infeed jam 6 8 14 7 12 13 71 4.85
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 4,85 % · laut Bericht: “Infeed jam”
Wörtliches Zitat anzeigen
Infeed jam 6 8 14 7 12 13 71 4.85
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 16,0 min · laut Bericht: “Infeed unit trip”
Wörtliches Zitat anzeigen
Infeed unit trip 8 1 2 0 0 5 16 1.09
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 1,09 % · laut Bericht: “Infeed unit trip”
Wörtliches Zitat anzeigen
Infeed unit trip 8 1 2 0 0 5 16 1.09
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 28,0 min · laut Bericht: “Infeed worm timing setting”
Wörtliches Zitat anzeigen
Infeed worm timing setting 4 8 0 0 0 16 28 1.91
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 1,91 % · laut Bericht: “Infeed worm timing setting”
Wörtliches Zitat anzeigen
Infeed worm timing setting 4 8 0 0 0 16 28 1.91
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 5,00 min · laut Bericht: “Infeed unit trip”
Wörtliches Zitat anzeigen
14 | Infeed unit trip | 8 | 1 | 2 | 0 | 0 | 5 | 16 | 1.09
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 16,0 min · laut Bericht: “Infeed worm timing setting”
Wörtliches Zitat anzeigen
15 | Infeed worm timing setting | 4 | 8 | 0 | 0 | 0 | 16 | 28 | 1.91
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Quelle öffnenVerlustzeit: 623 min · laut Bericht: “infeed screw”
Wörtliches Zitat anzeigen
infeed screw 13 623 93 2888 83.03 82.14
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Quelle öffnenAnzahl der Ereignisse: 13,0 events · laut Bericht: “infeed screw”
Wörtliches Zitat anzeigen
infeed screw 13 623 93 2888 83.03 82.14

