Automatic lubricator (oiler) failure
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The automatic oiler that supplies lubricant to chains, bearings or guides fails because of a jammed pump, clogged delivery line, empty reservoir or faulty drive/sensor, interrupting the lubricant feed. The line control system then stops the equipment to prevent dry-running damage to the lubricated components.
Was man dagegen tut
Implement a preventive maintenance routine that checks reservoir level, cleans filters and delivery lines, and tests pump/motor operation and level or flow sensors on a fixed schedule. Add predictive monitoring of lubricant flow or pressure so refills and component replacement happen before the oiler actually stops delivering.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,7 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,3 %]26 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,6 %]11 Studien
- Backwaren und Teigwaren0,4 % [0,0–1,5 %]24 Studien
- Fleisch, Geflügel und Fisch0,4 % [0,0–1,6 %]9 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–1,8 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,4 % [0,0–1,7 %]6 Studien
- Zucker und Süßwaren0,4 % [0,0–1,6 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,4 % [0,0–1,7 %]5 Studien
- Futtermittel und Heimtiernahrung0,4 % [0,0–1,8 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,7 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe automatic oiler that supplies lubricant to chains, bearings or guides fails because of a jammed pump, clogged delivery line, empty reservoir or faulty drive/sensor, interrupting the lubricant feed. The line control system then stops the equipment to prevent dry-running damage to the lubricated components.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseA dedicated lubrication fault alarm or low-level/low-pressure flag is raised, the oiler motor or pump run-status signal drops to zero while the main line is commanded to run, and the line transitions into a fault/stopped state with the oiler listed as the triggering device. Downstream and upstream equipment show starvation or blocking states correlated with the oiler fault timestamp.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement a preventive maintenance routine that checks reservoir level, cleans filters and delivery lines, and tests pump/motor operation and level or flow sensors on a fixed schedule. Add predictive monitoring of lubricant flow or pressure so refills and component replacement happen before the oiler actually stops delivering.
4Quellen
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Quelle öffnenVerlustzeit: 12,0 min · laut Bericht: “Oiler Stopping”
Wörtliches Zitat anzeigen
Oiler Stopping 7 5 12

