foratvise
Loslegen
organizational external

Inefficient maintenance spare parts inventory management

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Lack of a structured policy for stocking and controlling maintenance spare parts leads either to excess inventory that raises carrying costs or to stockouts that force production to wait for parts when equipment fails. This organizational gap is not tied to a specific machine but affects the responsiveness of the whole maintenance function.

Was man dagegen tut

Implement a structured spare parts management system with ABC/criticality classification, defined min-max stock levels and reorder points, and integration with the CMMS to balance inventory holding cost against the risk of stockout-driven downtime.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,5 % [0,1–1,5 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,8 %]
Anteil an der Verlustzeit bei Auftreten
56 % [45–67 %]
Studien / Einheiten
127 / 161
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,4 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,6 % [0,1–1,9 %]26 Studien
  • Bier, Wein und Spirituosen
    0,9 % [0,1–3,3 %]11 Studien
  • Backwaren und Teigwaren
    0,6 % [0,1–1,9 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,6 % [0,1–2,3 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,6 % [0,1–2,4 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    0,7 % [0,1–2,4 %]6 Studien
  • Zucker und Süßwaren
    0,6 % [0,1–2,2 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,3 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,6 % [0,1–2,2 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,3 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Lack of a structured policy for stocking and controlling maintenance spare parts leads either to excess inventory that raises carrying costs or to stockouts that force production to wait for parts when equipment fails. This organizational gap is not tied to a specific machine but affects the responsiveness of the whole maintenance function.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES does not capture this cause directly; it appears indirectly as abnormally long repair or waiting-for-parts states in maintenance work orders, extended downtime durations for otherwise simple failures, and recurring equipment_failure stops whose duration is inconsistent with the nature of the fault.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement a structured spare parts management system with ABC/criticality classification, defined min-max stock levels and reorder points, and integration with the CMMS to balance inventory holding cost against the risk of stockout-driven downtime.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der Verlustzeit: 13,0 % · laut Bericht: “high cost of maintenance inventory control, and other”
    Wörtliches Zitat anzeigen
    the main causes of the losses in production are stated as mechanical failure in washing section which covers the largest portion (35%), maintenance strategy followed by the plant (27%), maintenance management program (25%), and high cost of maintenance inventory control, and other (13%).