foratvise
Loslegen
Rüsten und Einstellen

Manual ingredient loading into filling tank

Rüsten und EinstellenVerfügbarkeitAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Operators manually add ingredients to the filling tank from bulk containers or bags, which requires opening and emptying the packaging, handling residues and repositioning containers. This replenishment task interrupts or delays the filling cycle because the tank cannot be fed and discharged at the same time, and the duration depends on the package format used (large totes versus small bags).

Was man dagegen tut

Replace manual bag or tote emptying with automated bulk unloading or dosing stations connected directly to the tank, and standardize ingredient package formats to reduce handling variability. Pre-stage ingredients near the tank and schedule replenishment to overlap with other planned changeover tasks to minimize line interruption.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,3 % [0,1–1,0 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,6 %]
Anteil an der Verlustzeit bei Auftreten
56 % [44–67 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,4 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,3 % [0,0–1,1 %]44 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,5 %]16 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,7 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,4 % [0,0–1,6 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,4 % [0,0–1,6 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,4 % [0,0–1,6 %]6 Studien
  • Zucker und Süßwaren
    0,4 % [0,0–1,6 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,4 % [0,0–1,7 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,5 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,4 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Operators manually add ingredients to the filling tank from bulk containers or bags, which requires opening and emptying the packaging, handling residues and repositioning containers. This replenishment task interrupts or delays the filling cycle because the tank cannot be fed and discharged at the same time, and the duration depends on the package format used (large totes versus small bags).

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

Tank level trace shows stepwise rises coinciding with filler idle or standby machine-state periods, and the filling line downstream shows starvation while the tank is being charged. Cycle time between consecutive batches lengthens in a pattern correlated with ingredient package size, without any fault or alarm being triggered.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Replace manual bag or tote emptying with automated bulk unloading or dosing stations connected directly to the tank, and standardize ingredient package formats to reduce handling variability. Pre-stage ingredients near the tank and schedule replenishment to overlap with other planned changeover tasks to minimize line interruption.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Mittlere Ereignisdauer: 10,0 min · laut Bericht: “Adição de ingredientes no tanque (sacos de 25kg)”
    Wörtliches Zitat anzeigen
    quando se trabalhava com sacos de 25kg o tempo de adição no tanque era de aproximadamente 10 minutos para enchê-lo.
  2. Mittlere Ereignisdauer: 1,22 min · laut Bericht: “Adição de ingredientes no tanque (embalagens de 600kg)”
    Wörtliches Zitat anzeigen
    Quando utilizavam ingredientes em embalagens de 600kg o tempo de abastecimento do tanque era de apenas 1,22 minutos, logo esta causa foi validada pela equipe do projeto.