foratvise
Loslegen
planned downtime

Planned downtime (scheduled stop)

planned downtimeAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 3 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The filler is deliberately stopped as part of the production schedule, for reasons such as scheduled maintenance, breaks, shift changes or lack of demand, rather than due to any equipment malfunction or product issue. No output is expected during this interval because the line is intentionally taken out of operation.

Was man dagegen tut

Confirm the stop against the production and maintenance schedule so it is correctly excluded from availability losses, and ensure the operator logs the planned reason code consistently. Optimize the schedule itself (maintenance windows, break timing, shift handover) to minimize unnecessary idle time without affecting the OEE loss accounting.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,6 % [0,1–1,6 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
57 % [45–68 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,7 % [0,1–2,3 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,5 % [0,1–1,7 %]44 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,2 %]16 Studien
  • Backwaren und Teigwaren
    0,7 % [0,1–2,6 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,7 % [0,1–2,4 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,7 % [0,1–2,7 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,7 % [0,1–2,5 %]6 Studien
  • Zucker und Süßwaren
    0,7 % [0,1–2,7 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,7 % [0,1–2,5 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,7 % [0,1–2,7 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,0 % [0,1–3,6 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The filler is deliberately stopped as part of the production schedule, for reasons such as scheduled maintenance, breaks, shift changes or lack of demand, rather than due to any equipment malfunction or product issue. No output is expected during this interval because the line is intentionally taken out of operation.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES shows the filler state transitioning to a dedicated planned-stop or standby code aligned with the shift calendar, with no associated fault or alarm codes. The stop duration matches scheduled maintenance or break windows and upstream/downstream equipment typically shows the same planned-state pattern simultaneously.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Confirm the stop against the production and maintenance schedule so it is correctly excluded from availability losses, and ensure the operator logs the planned reason code consistently. Optimize the schedule itself (maintenance windows, break timing, shift handover) to minimize unnecessary idle time without affecting the OEE loss accounting.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 0 mnt · laut Bericht: “Planned Down Time”
    Wörtliches Zitat anzeigen
    B Planned Dow n Time mnt 0 0 39
  2. Verlustzeit: 0 mnt · laut Bericht: “Planned Down Time”
    Wörtliches Zitat anzeigen
    B Planned Dow n Time mnt 0 0 39
  3. Verlustzeit: 39,0 mnt · laut Bericht: “Planned Down Time”
    Wörtliches Zitat anzeigen
    B Planned Dow n Time mnt 0 0 39