foratvise
Loslegen
Anlagenausfall (Störungen)

Rotary conveyor dry-run failure

Anlagenausfall (Störungen)VerfügbarkeitFördern und Puffern

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 86 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

A rotary conveying element (turntable, rotary accumulator or star-wheel) continues to turn while no containers are present on it, so the drive train and bearings run unloaded for a sustained period. The lack of product load changes friction and vibration patterns, accelerating wear or overheating of the drive, gearbox or bearings until the unit trips or breaks down and requires repair.

Was man dagegen tut

Interlock the rotary drive to reduce speed or stop automatically when container presence sensors confirm the unit is running empty beyond a set interval, and route an alert to the operator before damage occurs. Complement this with preventive lubrication and vibration/current monitoring of the drive and bearings to catch early degradation from repeated empty-running cycles.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,4 % [0,1–1,3 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,0–0,7 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–68 %]
Studien / Einheiten
86 / 112
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,5 % [0,0–1,9 %]11 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,5 % [0,0–1,6 %]28 Studien
  • Bier, Wein und Spirituosen
    0,5 % [0,0–1,8 %]12 Studien
  • Backwaren und Teigwaren
    0,5 % [0,1–2,0 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,5 % [0,1–1,9 %]5 Studien
  • Obst- und Gemüseverarbeitung
    0,5 % [0,0–2,2 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,5 % [0,0–2,1 %]4 Studien
  • Zucker und Süßwaren
    0,5 % [0,0–2,0 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,5 % [0,0–2,1 %]4 Studien
  • Futtermittel und Heimtiernahrung
    0,6 % [0,0–2,3 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,5 % [0,0–2,0 %]9 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

A rotary conveying element (turntable, rotary accumulator or star-wheel) continues to turn while no containers are present on it, so the drive train and bearings run unloaded for a sustained period. The lack of product load changes friction and vibration patterns, accelerating wear or overheating of the drive, gearbox or bearings until the unit trips or breaks down and requires repair.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA shows the rotary unit's run signal active with container presence sensors reporting empty for an extended span, followed by a fault alarm (overload, overcurrent or high vibration) and a change to a fault/stopped machine state. Upstream or downstream equipment may show starvation or blocking around the same timeframe, and the fault recurs intermittently before a sustained unplanned stop.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Interlock the rotary drive to reduce speed or stop automatically when container presence sensors confirm the unit is running empty beyond a set interval, and route an alert to the operator before damage occurs. Complement this with preventive lubrication and vibration/current monitoring of the drive and bearings to catch early degradation from repeated empty-running cycles.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 205 min · laut Bericht: “rotary empty”
    Wörtliches Zitat anzeigen
    rotary empty 14 205 295 5387 88.32 85.89
  2. Anzahl der Ereignisse: 14,0 events · laut Bericht: “rotary empty”
    Wörtliches Zitat anzeigen
    rotary empty 14 205 295 5387 88.32 85.89