foratvise
Loslegen
planned downtime

Scheduled maintenance and cleaning stop (excluded from OEE)

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The line is deliberately stopped according to a schedule to carry out preventive maintenance tasks or sanitation and line cleaning, and may also include other administrative or externally imposed stoppages that fall outside the direct responsibility of production management. Because these stops are anticipated and planned in advance, they are treated as a baseline reduction of available time rather than as a performance loss.

Was man dagegen tut

The usual engineering practice is to schedule these stops during periods of low demand, codify them clearly as planned events in the SCADA/MES calendar so they are excluded from availability loss calculations, and periodically audit their actual duration against the plan to prevent drift into unplanned downtime.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,6 % [0,1–1,5 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–68 %]
Studien / Einheiten
127 / 161
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,3 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,6 % [0,1–1,9 %]26 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,3 %]11 Studien
  • Backwaren und Teigwaren
    0,6 % [0,1–2,0 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,6 % [0,1–2,4 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,7 % [0,1–2,4 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    1,0 % [0,1–3,6 %]6 Studien
  • Zucker und Süßwaren
    0,6 % [0,1–2,3 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,4 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,6 % [0,1–2,3 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,4 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The line is deliberately stopped according to a schedule to carry out preventive maintenance tasks or sanitation and line cleaning, and may also include other administrative or externally imposed stoppages that fall outside the direct responsibility of production management. Because these stops are anticipated and planned in advance, they are treated as a baseline reduction of available time rather than as a performance loss.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES records show a line state explicitly tagged as planned stop, maintenance or cleaning, with start and end times aligned to the maintenance or sanitation schedule rather than triggered by a fault alarm. Production and fault counters remain flat during this interval, and no starvation or blocking pattern appears on upstream or downstream equipment.

Gegenmaßnahme

Ingenieurpraktische Hinweise

The usual engineering practice is to schedule these stops during periods of low demand, codify them clearly as planned events in the SCADA/MES calendar so they are excluded from availability loss calculations, and periodically audit their actual duration against the plan to prevent drift into unplanned downtime.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der Verlustzeit: 17,6 % · laut Bericht: “Paradas planejadas (g1) - manutenção preventiva e limpeza de linha”
    Wörtliches Zitat anzeigen
    Perdas por paradas planejadas (g1) por causas como manutenção preventiva e limpeza de linha que representavam cerca de 17,6% do tempo total de paradas;
  2. Anteil an der Verlustzeit: 71,0 % · laut Bericht: “Causas não consideradas pelo OEEL (a1, b3, e5, g1)”
    Wörtliches Zitat anzeigen
    as causas que provocavam paradas não consideradas pelo OEEL (a1, b3, e5, g1) representavam 71% do tempo total de paradas, conforme mostra a Figura 6.
  3. Verlustzeit: 51,9 h · laut Bericht: “Paradas planejadas e outras causas fora da responsabilidade dos gestores”
    Wörtliches Zitat anzeigen
    perdas por paradas planejadas e outras causas fora da responsabilidade dos gestores da área operacional, somadas, foram responsáveis por uma perda de volume de produção maior, que se manteve em torno de 187 t por semana (51,9 horas perdidas por semana) nas fases 1 e 2.