Screw press downtime of mixed/unrecorded cause
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 2 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 2 der 37 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
The primary study logs stop time on the screw press under generic labels such as set up, breakdown, downtime, planned downtime or dirty without separating the underlying physical or organisational mechanism, so the same bucket mixes changeovers, mechanical failures, scheduled maintenance and hygiene-related stops. Because the reason code is not disaggregated at source, the cluster cannot be tied to a single failure mode or adjustment task.
Was man dagegen tut
Implement a structured, mutually exclusive downtime reason-code taxonomy at the press HMI that forces the operator to separate changeover, mechanical failure, scheduled maintenance and hygiene stops at the moment they occur, and audit the coding periodically for consistency. This reclassification enables the loss to be routed to the correct six-big-losses category for targeted root-cause analysis.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,5 % [0,3–4,2 %]
- Erwarteter Anteil an der Verlustzeit
- 0,9 % [0,2–2,4 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–68 %]
- Studien / Einheiten
- 37 / 44
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,7 % [0,2–6,5 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,8 % [0,2–6,6 %]1 Studie
- Bier, Wein und Spirituosen1,8 % [0,2–6,6 %]1 Studie
- Backwaren und Teigwaren1,8 % [0,2–7,2 %]0 Studien
- Fleisch, Geflügel und Fisch1,7 % [0,2–6,7 %]2 Studien
- Obst- und Gemüseverarbeitung1,7 % [0,2–6,6 %]3 Studien
- Getreide- und Ölsaatenmüllerei3,6 % [0,4–12,6 %]6 Studien
- Zucker und Süßwaren1,7 % [0,2–6,5 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,6 % [0,2–5,8 %]4 Studien
- Futtermittel und Heimtiernahrung1,6 % [0,2–5,5 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,7 % [0,2–6,1 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe primary study logs stop time on the screw press under generic labels such as set up, breakdown, downtime, planned downtime or dirty without separating the underlying physical or organisational mechanism, so the same bucket mixes changeovers, mechanical failures, scheduled maintenance and hygiene-related stops. Because the reason code is not disaggregated at source, the cluster cannot be tied to a single failure mode or adjustment task.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseDowntime counters or state logs for the press show a single aggregated stop-time tag covering several reason codes, with no consistent correlation to a specific alarm, sensor pattern or maintenance work order; equivalent stop durations appear under different labels across shifts or batches. The lack of a dedicated digital reason code makes it impossible to isolate a repeatable SCADA signature.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement a structured, mutually exclusive downtime reason-code taxonomy at the press HMI that forces the operator to separate changeover, mechanical failure, scheduled maintenance and hygiene stops at the moment they occur, and audit the coding periodically for consistency. This reclassification enables the loss to be routed to the correct six-big-losses category for targeted root-cause analysis.
4Quellen
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 420 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
1–6 Maret 8640 420 360 480 1166,01 0 1166,01
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 360 menit · laut Bericht: “Planned downtime”
Wörtliches Zitat anzeigen
1–6 Maret 8640 420 360 480 1166,01 0 1166,01
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 480 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
1–6 Maret 8640 420 360 480 1166,01 0 1166,01
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 390 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
8–13 Maret 7200 390 300 420 961,76 0 961,76
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 300 menit · laut Bericht: “Planned downtime”
Wörtliches Zitat anzeigen
8–13 Maret 7200 390 300 420 961,76 0 961,76
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 420 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
8–13 Maret 7200 390 300 420 961,76 0 961,76
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 450 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
15–20 Maret 8640 450 360 540 1043,31 0 1043,31
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 540 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
15–20 Maret 8640 450 360 540 1043,31 0 1043,31
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 390 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
22–27 Maret 7200 390 300 390 1154,16 0 1154,16
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 240 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
29–3 April 5760 240 240 330 782,6 0 782,6
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 240 menit · laut Bericht: “Planned downtime”
Wörtliches Zitat anzeigen
29–3 April 5760 240 240 330 782,6 0 782,6
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 330 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
29–3 April 5760 240 240 330 782,6 0 782,6
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 300 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
5–10 April 7200 300 300 450 601,64 0 601,64
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 450 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
5–10 April 7200 300 300 450 601,64 0 601,64
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 360 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
12–17 April 7200 360 240 510 867,39 0 867,39
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 510 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
12–17 April 7200 360 240 510 867,39 0 867,39
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 270 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
19–24 April 5760 240 240 270 805,98 0 805,98
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 480 menit · laut Bericht: “Breakdown”
Wörtliches Zitat anzeigen
26–30 April 5760 480 240 360 744,24 0 744,24
- Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness pada PT Bintara Tani Nusantara (2022)Quelle öffnenVerlustzeit: 360 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
26–30 April 5760 480 240 360 744,24 0 744,24
- Evaluasi Kinerja Mesin Screw Press Melalui Penerapan Total Productive Maintenance (TPM) di Pabrik Kelapa Sawit PT. XYZ: Performance Evaluation of Screw Press Machine through the Implementation of Total Productive Maintenance (TPM) at Palm Oil Mill of PT. XYZ (2025)Quelle öffnenFehlerquote: 0,0140 % · laut Bericht: “Dirty”
Wörtliches Zitat anzeigen
Desember 43.500.000 0,07 34.140 89,19% 0,014 6.090 99,98%
- Evaluasi Kinerja Mesin Screw Press Melalui Penerapan Total Productive Maintenance (TPM) di Pabrik Kelapa Sawit PT. XYZ: Performance Evaluation of Screw Press Machine through the Implementation of Total Productive Maintenance (TPM) at Palm Oil Mill of PT. XYZ (2025)Quelle öffnenVerlustzeit: 720 menit · laut Bericht: “Downtime”
Wörtliches Zitat anzeigen
November 25 36.000 3.000 33.000 720 32.280 97,81
- Evaluasi Kinerja Mesin Screw Press Melalui Penerapan Total Productive Maintenance (TPM) di Pabrik Kelapa Sawit PT. XYZ: Performance Evaluation of Screw Press Machine through the Implementation of Total Productive Maintenance (TPM) at Palm Oil Mill of PT. XYZ (2025)Quelle öffnenVerlustzeit: 4.260 menit · laut Bericht: “Downtime”
Wörtliches Zitat anzeigen
Desember 28 40.320 1.920 38.400 4.260 34.140 88,90
- Evaluasi Kinerja Mesin Screw Press Melalui Penerapan Total Productive Maintenance (TPM) di Pabrik Kelapa Sawit PT. XYZ: Performance Evaluation of Screw Press Machine through the Implementation of Total Productive Maintenance (TPM) at Palm Oil Mill of PT. XYZ (2025)Quelle öffnenVerlustzeit: 3.000 menit · laut Bericht: “Planned Downtime”
Wörtliches Zitat anzeigen
November 25 36.000 3.000 33.000 720 32.280 97,81
- Evaluasi Kinerja Mesin Screw Press Melalui Penerapan Total Productive Maintenance (TPM) di Pabrik Kelapa Sawit PT. XYZ: Performance Evaluation of Screw Press Machine through the Implementation of Total Productive Maintenance (TPM) at Palm Oil Mill of PT. XYZ (2025)Quelle öffnenVerlustzeit: 1.920 menit · laut Bericht: “Planned Downtime”
Wörtliches Zitat anzeigen
Desember 28 40.320 1.920 38.400 4.260 34.140 88,90

