foratvise
Loslegen
Anlagenausfall (Störungen)

Filling sensor failure (electrical/photoelectric)

Anlagenausfall (Störungen)VerfügbarkeitAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

A level, position or photoelectric sensor used to control or supervise the filling process degrades, becomes misaligned, soiled or electrically faulty and stops delivering a reliable signal to the control system. The filler then cannot confirm container presence, fill level or valve position and the line is stopped until the sensor is repaired or replaced.

Was man dagegen tut

Apply a preventive maintenance schedule that includes cleaning, alignment checking and functional testing of filling sensors, and replace units showing drift or intermittent faults before they fail completely. Standardize sensor specifications and mounting brackets to simplify replacement, and add diagnostic self-test or redundancy where the sensor is critical to safety or product quality.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,4 % [0,1–1,1 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,6 %]
Anteil an der Verlustzeit bei Auftreten
57 % [45–67 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,7 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,4 % [0,0–1,3 %]44 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,7 %]16 Studien
  • Backwaren und Teigwaren
    0,5 % [0,0–1,9 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,5 % [0,0–1,8 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,5 % [0,0–1,8 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,5 % [0,0–1,8 %]6 Studien
  • Zucker und Süßwaren
    0,5 % [0,0–1,7 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,5 % [0,0–1,7 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,7 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,6 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

A level, position or photoelectric sensor used to control or supervise the filling process degrades, becomes misaligned, soiled or electrically faulty and stops delivering a reliable signal to the control system. The filler then cannot confirm container presence, fill level or valve position and the line is stopped until the sensor is repaired or replaced.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES logs show a sensor fault or out-of-range signal alarm on the filling station coinciding with a machine downstate, often with repeated intermittent fault/clear cycles before the final stop; the equivalent fault code or I/O status bit for the electrical or photoelectric input remains active for the duration of the stop. Fill count and cycle timers freeze while downstream and upstream buffers show no corresponding material flow issue.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Apply a preventive maintenance schedule that includes cleaning, alignment checking and functional testing of filling sensors, and replace units showing drift or intermittent faults before they fail completely. Standardize sensor specifications and mounting brackets to simplify replacement, and add diagnostic self-test or redundancy where the sensor is critical to safety or product quality.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 45,0 min · laut Bericht: “Electrical sensor”
    Wörtliches Zitat anzeigen
    Electrical sensor 2 45 107 3228 95.53 91.81
  2. Anzahl der Ereignisse: 2,00 events · laut Bericht: “Electrical sensor”
    Wörtliches Zitat anzeigen
    Electrical sensor 2 45 107 3228 95.53 91.81
  3. Zeit zwischen Ereignissen: 27,6 not reported · laut Bericht: “Photoelectric Sensor”
    Wörtliches Zitat anzeigen
    Waktu Kerusakan Lognormal MTTF 27,633
  4. Mittlere Ereignisdauer: 200 not reported · laut Bericht: “Photoelectric Sensor”
    Wörtliches Zitat anzeigen
    Waktu Perbaikan Weibull MTTR 199,8096