Selection/sorting error in separation process
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 0 der 37 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
During separation, the sorting or classification mechanism (mechanical screens, optical or sensor-based sorters, centrifugal or gravity separators) fails to correctly discriminate between acceptable and non-acceptable product fractions. This mis-selection lets off-spec material pass as good product, or conversely rejects good product, generating first-pass defects without any mechanical breakdown.
Was man dagegen tut
Recalibrate and periodically verify the sorting sensors or screening elements against reference samples, tighten detection thresholds and maintain cleanliness of optical or mechanical sensing surfaces, and implement statistical monitoring of reject/accept ratios to detect drift before it causes sustained defect generation.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,6 % [0,1–1,8 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,0–0,9 %]
- Anteil an der Verlustzeit bei Auftreten
- 48 % [35–59 %]
- Studien / Einheiten
- 37 / 44
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,7 % [0,1–2,6 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,7 % [0,1–2,8 %]1 Studie
- Bier, Wein und Spirituosen0,7 % [0,1–2,7 %]1 Studie
- Backwaren und Teigwaren0,7 % [0,1–2,9 %]0 Studien
- Fleisch, Geflügel und Fisch0,7 % [0,1–2,6 %]2 Studien
- Obst- und Gemüseverarbeitung0,7 % [0,1–2,8 %]3 Studien
- Getreide- und Ölsaatenmüllerei0,7 % [0,0–2,8 %]6 Studien
- Zucker und Süßwaren0,7 % [0,1–2,8 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,7 % [0,1–2,7 %]4 Studien
- Futtermittel und Heimtiernahrung0,7 % [0,0–2,7 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,7 % [0,0–2,8 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDuring separation, the sorting or classification mechanism (mechanical screens, optical or sensor-based sorters, centrifugal or gravity separators) fails to correctly discriminate between acceptable and non-acceptable product fractions. This mis-selection lets off-spec material pass as good product, or conversely rejects good product, generating first-pass defects without any mechanical breakdown.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES shows the separator running in normal operating state with no fault or downtime alarms, while downstream quality or reject counters record an elevated proportion of misclassified units; sensor or detector signal traces may show drift, noise or threshold crossings inconsistent with the setpoint without triggering a stop.
Gegenmaßnahme
Ingenieurpraktische HinweiseRecalibrate and periodically verify the sorting sensors or screening elements against reference samples, tighten detection thresholds and maintain cleanliness of optical or mechanical sensing surfaces, and implement statistical monitoring of reject/accept ratios to detect drift before it causes sustained defect generation.
4Quellen
- Waste Minimization in Peanut Snack Production using Lean Manufacturing tools: a Case Study (2024)Quelle öffnenFehlerquote: 4,25 % · laut Bericht: “error rate in selection process”
Wörtliches Zitat anzeigen
The results of the Poka Yoke template showed reduced error rates: 4.25% in selection process, 2.86% in toasting and 2.73% in the semi-toasting.

