Pre-production resource staging and preparation
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 0 der 37 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Before a run can start the operator must physically move and connect auxiliary resources such as hoses and lines, and must check and stage the raw material, and none of this preparatory work can begin until the previous run has ended, so the equipment remains stopped while these internal setup tasks are carried out.
Was man dagegen tut
Apply SMED principles to convert these tasks into external setup performed while the previous run is still active, pre-stage hoses, connections and verified raw material near the point of use, and use standardized checklists so preparation starts before the line actually stops.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,6 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,0–0,9 %]
- Anteil an der Verlustzeit bei Auftreten
- 56 % [44–66 %]
- Studien / Einheiten
- 37 / 44
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,0–2,5 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,6 % [0,0–2,7 %]1 Studie
- Bier, Wein und Spirituosen0,6 % [0,0–2,6 %]1 Studie
- Backwaren und Teigwaren0,6 % [0,0–2,4 %]0 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,0–2,4 %]2 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,0–2,4 %]3 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,0–2,5 %]6 Studien
- Zucker und Süßwaren0,6 % [0,0–2,5 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,0–2,6 %]4 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,0–2,3 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,0–2,4 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseBefore a run can start the operator must physically move and connect auxiliary resources such as hoses and lines, and must check and stage the raw material, and none of this preparatory work can begin until the previous run has ended, so the equipment remains stopped while these internal setup tasks are carried out.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseThe equipment state log shows an extended changeover or setup state with zero throughput and no fault or failure alarm active, often with manually entered stop reasons referencing hose placement, line connection or raw material checks, and the duration is tied to operator availability rather than to any machine signal.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply SMED principles to convert these tasks into external setup performed while the previous run is still active, pre-stage hoses, connections and verified raw material near the point of use, and use standardized checklists so preparation starts before the line actually stops.
4Quellen
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Quelle öffnenVerlustzeit: 201 s · laut Bericht: “Verificar y preparar la materia prima”
Wörtliches Zitat anzeigen
Verificar y preparar la materia prima 201, 4
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Quelle öffnenVerlustzeit: 86,7 s · laut Bericht: “Trasladar y preparar manguera de agua”
Wörtliches Zitat anzeigen
Trasladar y preparar manguera de agua 86,7

